Abstract:REBCO coated conductors are exposed to rotating magnetic fields in various high-temperature super conducting (HTS) applications, such as HTS rotating machines and flux pumps. AC loss will begenerated in the conductors when they carry AC current under rotating magnetic fields. We define AC loss in the coated conductors with and without current as total AC loss and magnetization loss, respectively. In this work, total AC loss and magnetization loss, in a REBCO tape under rotating magnetic fields and a perpendicular AC standing wave magnetic field are numerically investigated. We employ a 2D finiteelement method (FEM) based on the T-A formulation, where T and A, are the current and magnetic vectorpotentials, respectively. In the simulations, the external magnetic field amplitude (B-m) is up to 500 mT and the reduced AC current (i=I-t/I-c0) varies from 0.1 to 0.9, where theItandIc0are the amplitude of the transport current and self-field critical current of the conductor, respectively. Two different types of rotatingfields are considered: one is a uniform field with equal amplitudes and phases at each position, and the other being a non-uniform field created by a rotating Halbach array. Different tape widths ranging from4 mm to 40 mm are considered. Interestingly, the simulation results show substantially higher magnetizationloss in the perpendicular standing wave compared to the rotating magnetic fields when B-m is over 100 m T. We attribute the result to the fact that the magnetization loss is propotional to Jc of the conductor at magnetic field amplitudes much greater than the effective penetration magnetic field. Evidently, the instantaneous loss curves of the SW model and RMF-Uniform model at 200 mT exhibited close similarity with evolvingJcvalues of the two models. Furthermore, when B-m is lower than the effective penetrated field, we observea pronounced disparity in magnetization loss of the wider tape between uniform and non-uniform rotating fields. This highlights the importance of considering the effects of non-uniform field distribution, particularlyat lower magnetic field. We further show that total AC loss under the perpendicular standing wave magnetic field remains greater than that under rotating magnetic fields when B-m>100 mT and i<0.5.

Study on the AC Loss Reduction of REBCO Double Pancake Coil

An Optimized Coil Array and Passivity-Based Control for Receiving Side Multilevel Connected DC-DC Converter of Dynamic Wireless Charging

Reduction in AC Loss of REBCO Coils with Optimum Multi-Width Tape Induced by Part Slitting Method

AC loss in ReBCO pancake coils and stacks of them: modelling and measurement

AC loss calculation for multi pancakes of (Re)BCO coated conductor using line front

Experimental AC loss study on REBCO coil assemblies coupled with an iron cylinder

Winding Loss Reduction Based on the Even Magnetomotive Force in the Wide-Range RDCX Converter for OBC

AC loss modelling in superconducting coils and motors with parallel tapes as conductor

Numerical Study on Ramping Loss of an HTS Pancake Coil with Different Co-Wound Materials

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Sudden Discharging and Overcurrent Simulations of REBCO Coils Coated With Conductive Epoxy Resin

Modelling of AC loss in coils made of thin tapes under DC bias current

Numerical Study On Ac Loss Characteristics Of Rebco Armature Windings In A 15-Kw Class Fully Hts Generator

Turn-to-Turn Contact Resistance Measurement of NI REBCO Double Pancake Coils

Comparison of AC Losses of YBCO Circular Pancake Coils and Infinitely Long Stack Approximation

The Research on No-Insulation ReBCO Racetrack Coil

A modified J model for efficiently calculating the electromagnetic fields of ReBCO no-insulation pancake coils using an explicit-implicit hybrid algorithm

Numerical Simulations on AC Loss of the REBCO Tape under Rotating Magnetic Field

Investigation of the Effect of Difference in the Characteristic Resistance of Dp Coils on the Field and Losses of Mi Hts Magnets

Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets

AC loss calculation in REBCO coils or stacks by solving the equation of motion for current using an integration approach