Abstract:Magnesium aluminate spinel (MgAl2O4) ceramics are high-performance and carbon-free materials widely used in both military and civilian fields. However, it is usually challenging to densify during the solid-state sintering process. The excellent properties of some rare earth oxides have been proved to promote the densification of MgAl2O4 spinel ceramics. But the mechanism of promoting sintering is not clear. In the present work, MgAl2O4 spinel ceramics have been successfully fabricated by co-doping CeO2 and La2O3 via a single-stage solid-state reaction sintering. The effects of addition amounts of CeO2 and La2O3 on phase compositions, microstructures, sintering characteristics, cold compressive strength, and thermal shock resistance of as-prepared MgAl2O4 spinel ceramics were systematically investigated. The results show that by co-doping CeO2 and La2O3 can increase the defect concentration due to the lattice distortion. This could promote the movement of Al3+ and Mg2+ at high temperature, which is beneficial to the formation of more secondary MgAl2O4 spinel. t-ZrO2 with more Ce4+ filling between spinel grains could prevent the growth of grains and promote the densification, besides the new-formed LaAlO3 that was mainly distributed along the grain boundary of the MgAl2O4 phase, both of which were favorable for the formation of dense microstructure of MgAl2O4 spinel materials. At the same time, the formation of more secondary MgAl2O4 spinel and sintering densification also improve the mechanical properties of spinel ceramics. La3+ will segregate to the spinel grain boundary, preventing grain boundary movement and absorbing the main crack's fracture energy. With 3 wt% CeO2 and 3 wt% La2O3 co-doping, the bulk density of the sample increased from 3.02 g∙cm−3 to 3.55 g∙cm−3; the apparent porosity decreased from 12.21% to 9.97%; the cold compressive strength increased from 172.88 MPa to 189.54 MPa; and the residual strength retention ratio after thermal shock increased from 84.92% to 89.15%.

Preparation and Characterization of Novel Nonstoichiometric Magnesium Aluminate Spinels

Effect of Synthetic Parameters on Synthesis of Magnesium Aluminum Spinels

Effect of different MgO/Al2O3 ratios on microstructural densification, sintering process and mechanical property of MgAl2O4 materials

Synthesis of magnesium aluminate spinel by reaction sintering with different magnesia sources

Sintering behavior and microstructure of (1-x)MgAl2O4-xMg2TiO4 spinel solid solutions prepared by isostructural heterogeneous nucleation

Microstructural and Optical Properties of MgAl2O4 Spinel: Effects of Mechanical Activation, Y2O3 and Graphene Additions

Synthesis and Characterization of Porous Magnesium Aluminate Spinel by Hydrothermal Process

Structural Study of Mg y Al (8+ x –2 y )/3 O 4– x N x (0 < x < 0.5, 0 < y < 1) Spinel Probed by X-ray Diffraction, 27 Al MAS NMR, and First-Principles Calculations

Effects of Sm2O3 addition on sintering behavior of pre-synthesized magnesia-rich magnesium aluminate spinel

Polyol-mediated synthesis and characterization of magnesium–aluminum spinel nanoparticles

Preparation and Characterization of Porous Mgal2o4 Spinel Ceramic Supports from Bauxite and Magnesite

Preparation and mechanical properties of aluminate cements containing magnesium aluminate spinel

Self-Propagating High-Temperature Synthesis of Magnesium Aluminate Spinel Using Mg–Al Alloy

Physical Properties of MgAl2O4, CoAl2O4, NiAl2O4, CuAl2O4, and ZnAl2O4 Spinels Synthesized by a Solution Combustion Method

Crystal Structure and Bond-Valence Investigation of Nitrogen-Stabilized LiAl 5 O 8 Spinels

Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3

The effect of MnO2 additive on the microstructure and mechanical properties of magnesium aluminate spinel

Influence of in situ dysprosium aluminate garnet formation on sintering of reaction sintered magnesium aluminate spinel

Phase Composition, Microstructure and Mechanical Properties of Aluminous Cements Containing Magnesium Aluminate Spinel

Doping Effect of Cobalt,cerium and Magnesium to Spinel LiMn2O4 on Their Structures Character and Properties

Influence of Parameters of High-Energy Ball Milling on the Synthesis and Densification of Magnesium Aluminate Spinel