Abstract:The CoCrFeNi alloy thin films deposited onto c‐sapphire exhibit a new orientation relationship (OR) with 001fcc∥0001Al2O3 for the first time in any face centered cubic (fcc) metallic system. This OR occurs in addition to the well‐known ones with 111fcc∥0001Al2O3 . Formation of 345fcc∥0001Al2O3 , other hklfcc∥0001Al2O3 , the role of growth and annealing twins is discussed. Face‐centered cubic (fcc) metals deposited onto crystalline substrates grow heteroepitaxially with specific orientation relationships (ORs). The ORs depend on a number of factors including lattice mismatch, bonding and the relative symmetry between the surface and the film. Less explored factors include defects like growth and annealing twins. In this study, a high density of nanotwins in as‐deposited films delay grain growth of OR1 ({111}fcc∥(0001)Al2O3 , ⟨110⟩fcc∥⟨101 ̄0⟩Al2O3 ) grains up to 0.56 Tm. A new OR with respect to the c‐sapphire substrate is found, compared to the well‐known OR1 and OR2 which grow with the {111}fcc ∥(0001)Al2O3 . This is named OR3, grows above 0.56 Tm with {001}fcc∥(0001)Al2O3,⟨100⟩fcc∥⟨101 ̄0⟩Al2O3 . The OR3 growth is related to strain and defect energy advantage. An unusual OR {345}fcc∥(0001)Al2O3 accompanies OR3 in most films, occupying an area fraction of >0.3. A minute (<0.05) but consistent fractions of {447}fcc , {115}fcc , {221}fcc , {236}fcc and 146fcc all parallel to 0001Al2O3 and related to annealing twins in exact and near {001}fcc and {111}fcc grains are observed. The study opens new directions in the crystallography of ORs, considering the role of twins in addition to the surface and strain energies.

Characteristic Orientation Relationships in Nanoscale Al-AlCu Eutectic

Revealing interface-assisted plastic anisotropy <i>via in situ</i> transmission electron microscopy tension of lamellar TiAl

The BCC-FCC Phase Transformation Pathways and Crystal Orientation Relationships in Dual Phase Materials From Al-(Co)-Cr-Fe-Ni Alloys

Orientation relationships and interface structure between Al11Ce3 and Al in Al–Ce eutectic

A study on the orientation inheritance in laminated NiAl produced by in situ reaction annealing

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Faceted Kurdjumov-Sachs Interface-Induced Slip Continuity in the Eutectic High-Entropy Alloy, AlCoCrFeNi2.1

Orientation relationships and interfaces between NiAl and G-phase Ni16Hf6Si7

Precipitation and crystallographic relationships of nanosized η/η’ precipitates at S-Al interface in Al-Zn-Mg-Cu alloy

Systematic discovery of new nano-scale metastable intermetallic eutectic phases in laser rapid solidified Aluminum-Germanium alloy

Crystallography and Interface Structures in As-Arc Melted and Laser Surface-Remelted Aluminum–Silicon Alloys with and without Strontium Addition

Equiatomic CoCrFeNi Thin Films on C‐Sapphire: The Role of Twins and Orientation Relationships

Orientation effect on / phase interface mediated deformation mechanism in titanium alloy

EVOLUTION OF LOCAL ORIENTATIONS WITHIN INDIVIDUAL GRAINS IN ROLLED PURE POLYCRYSTALLINE ALUMINUM

Inclined θ′ precipitates with terraced Cu/Mn-rich multilayers in Al–Cu alloys

Experimental and first-principles characterization of heterogeneous nucleation of η on the E(Al18Mg3Cr2) phase in the 7075 Al alloys

Crystallographic relationships of T-/S-phase aggregates in an Al-Cu-Mg-Ag alloy

The formation mechanism of eutectic microstructures in NiAl-Cr composites

Atomic-scale understanding of the γ/α2 interface in a TiAl alloy

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

In situ SEM characterization of tensile behavior of nano-fibrous Al–Si and Al–Si–Sr eutectics