Abstract:The Leighton dish formerly at the Caltech Submillimeter Observatory will be reassembled to become the Leighton Chajnantor Telescope (LCT). It will be required to demonstrate high surface accuracy and controlled radiation patterns at high frequency, which are largely limited by surface error due to panel misalignment on the primary reflector. Not only the surface rms error but also the error distribution has effect on the radiation pattern of the antenna. Therefore, analyzing the effect of error distributions resulting from various panel misalignments on the radiation pattern of the antenna will facilitate better compensation of surface errors during the reassembly process. To acquire the radiation pattern of LCT's antenna with panel misalignments, we first propose a simulation method based on physical optics and the physical theory of diffraction, which offers precise results but is time-consuming, especially at high frequencies. Then, we propose a rapid computation method that combines the method of calculating the optical path difference (OPD), the OPD fitting method, and the aperture integration method for segmented reflectors. Experimental results demonstrate that the rapid computation method is highly efficient and accurate compared to the simulation method. In order to show the effect of error distributions due to two typical panel misalignments (i.e., piston and tip-tilt) on radiation patterns, experiments are conducted using the two proposed methods for various error distributions. These experiments indicate that for the same surface rms error, smaller panel errors at smaller normalized aperture radii are more conducive to achieving improved characteristics of the radiation patterns, such as reduced peak gain losses and lower sidelobe levels. Additionally, comparison experiments also reveal that variations in piston error have a greater impact on the radiation patterns than variations in tip-tilt error under the same surface rms error.

Second-Order Expansion Computation of Average Power Pattern of Cylindrical Reflector Antennas with Random Surface Errors

Theoretical Analysis of Surface Error for Deployable Truss Antenna

Error Computation Method of Deployable Truss Antenna

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Error impact analysis and experimental research for absolute testing of spherical surfaces

Elimination of reference surface error on high-accuracy subaperture stitching

An Efficient Total Radiated Power Test Method Based on Optimal Interpolation over a Sphere of Large Antenna Array

Error Analysis Of Spherical Ultra-Precision Measurement

Phase Error Analysis for Reflectarray Antennas Based on Study of Quasi-Periodic Effect

Interval-Based Tolerance Analysis Method for Petal Reflector Antenna with Random Surface and Deployment Errors

A <i></i>-conical position error representation method considering high-order position relevance of array elements

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Patch Antenna Radiation Pattern Evaluation Based on Phaseless and Single-Plane Near-Field Scanning

Conformal Subgridding and Application to One-Eighth Spherical Shell Dielectric Resonator Antenna Array

Evaluation of Power Pattern of Antenna Arrays With Elements Position Errors Using Quadratic Relaxation Programming

Spherical Bessel Function Based Deterministic Beam-Forming for Spherical-Surfaced Apertures

Surrogate-Model-Based Interval Analysis of Spherical Conformal Array Antenna with Power Pattern Tolerance

An Efficient Volume Integral Equation Method for Analysis of Boresight Error of a Radome with Minor Ablation

Studies On Planar Reflectarrays With Spherical-Phase Distribution For 2-D Beam-Scanning

Effect of Panel Misalignment Error Distribution on the Radiation Pattern of Leighton Chajnantor Telescope's Antenna

Analysis of the Influence of Fabrication Errors on the Far-Field Performance of Si and Si3N4 Antennas