Abstract:The morphological evolution and grain orientations of intermetallic compounds (IMCs) were investigated during the formation of full Cu3Sn joints at two soldering temperatures (310 and 430 °C). The mechanical properties of both types of full Cu3Sn joints were then analyzed. The experimental results showed that the morphology of interfacial IMCs varied significantly at two temperatures. At 310 °C, scallop-like Cu6Sn5 grains became larger but were fewer in number and the top of the scallops became rough due to the grain ripening effect. With the increase in the soldering temperature to 430 °C, Cu3Sn no longer grew uniformly as observed during soldering at 310 °C, but exhibited various growth rates. Furthermore, some η-Cu6Sn5 transformed into η′-Cu6Sn5 during cooling, and the following orientation groups between η′-Cu6Sn5 and η-Cu6Sn5, i.e., {102}η′ and {<math>112‾0</math>}η, {112}η′ and {<math>101‾0</math>}η, and {<math>2‾01</math>}η′ and {0001}η, were found to be near-parallel. The Cu3Sn grains were preferably oriented with [203] and [100] crystal orientations parallel to transverse direction (TD) at both temperatures. Noteworthy, the Cu3Sn grains with [203]//TD and [010]//ND grew much faster than those with other orientations at 430 °C. Moreover, molecular dynamics simulation showed that the diffusion coefficients of atoms in Cu3Sn crystals along [203] direction were significantly greater than those in other low-index crystal directions. After soldering, two types of full Cu3Sn joints obtained at different temperatures exhibited different shear strength and fracture mechanisms.

Effect of Electric Current on Grain Orientation and Mechanical Properties of Cu-Sn Intermetallic Compounds Joints

Influence of Electric Current on the Grain Orientation of Cu-Sn Intermetallic Compounds in Cu/molten Sn/Cu Interconnection System

Ultrafast formation of unidirectional and reliable Cu3Sn-based intermetallic joints assisted by electric current

Enhanced shear strength of Cu–Sn intermetallic interconnects with interlocking dendrites under fluxless electric current-assisted bonding process

The Effect of Cu Orientation on Fracture Location in Cu<inf>3</inf>Sn-Cu Interface Structure Under Monotonic Loading Condition by Molecular Dynamics Simulation

The Effect Of Cu Orientation On Fracture Location In Cu3sn-Cu Interface Structure Under Monotonic Loading Condition By Molecular Dynamics Simulation

Growth Kinetics of Cu6Sn5 Intermetallic Compound in Cu-liquid Sn Interfacial Reaction Enhanced by Electric Current

Effect of intermetallic on electromigration and atomic diffusion in Cu/SnAg 3.0Cu 0.5/Cu joints: Experimental and first-principles study

Morphology evolution and grain orientations of intermetallic compounds during the formation of full Cu3Sn joint

Effect of electric field and Sn grain orientation on Cu consumption in Sn/Cu solder joint

Morphologies and grain orientations of CuSn intermetallic compounds in Sn3.0Ag0.5Cu/Cu solder joints

Rapid formation of Cu-Sn intermetallic compounds by strong electric current

Microstructure and Grain Orientation Evolution in Sn3.0Ag0.5Cu Solder Interconnects under Electrical Current Stressing

Influence of texture of Cu on the growth of Cu-Sn intermetallic compounds

Effect of Intermetallic Compounds on Mechanical Properties of Copper Joints Ultrasonic-Soldered with Sn-Zn Alloy

Growth mechanism of Cu-Sn full IMC joints on polycrystalline and single crystal Cu substrate

Intermetallic compounds formed in Sn droplet on Cu substrate under the impact of electric currents

Microstructure and Grain Orientation Evolution in SnPb/SnAgCu Interconnects under Electrical Current Stressing at Cryogenic Temperature

Effects of Cu Orientation on the Microstructure of Sn-2ag-2.5zn/Cu Interface

Effects of electromigration on interfacial reactions in cast Sn/Cu joints

Effect of Electric Current Stressing on the Shear Strength and Fracture Behavior of Micro-Scale BGA Structured Cu/Sn–3.0Ag–0.5Cu/Cu Joints