Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Electronic Pulses from Pulsed Field Emission of CNT Cathodes

Investigation of Pulsed Field Electron Emission from Carbon Nanotube Thin Films

Laser tuned field emission of the carbon nanotube arrays grown on an optical fiber

Two-color laser driven enhanced electron emission from carbon nanotubes with long carrier lifetime

High Brightness Field Emission from Printed Carbon Nanotubes in an S-Band Microwave Gun

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Quiver-Quenched Optical-Field-Emission from Carbon Nanotubes

Optically Induced Field-Emission Source Based on Aligned Vertical Carbon Nanotube Arrays

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Very High Field-Emission Current from A Carbon-Nanotube Cathode with A Pulse Driving Mode

Electron Emission from Carbon Nanotube Films under Pulsed Fields

Large Current Emission from CNTs Cold Cathode

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Electron Emission and Structure Stability of Carbon Nanotube Cold Cathode Driven by Millisecond Pulsed Voltage

Effects of Pulsewidth and Area of Carbon Nanotube Films on Their Pulsed Field Emission Characteristics

Carbon Nanotubes As an Ultrafast Emitter with A Narrow Energy Spread at Optical Frequency

Carbon-nanotube Cathodes on Optical Fibers

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

The experimental characterization of vacuum breakdown in pulsed field emission from individual carbon nanotube