Abstract:Biogas dry reforming or dry reforming of methane (DRM) is an alternative to produce hydrogen, in the context of development of sustainable routes for energy production, since this route uses CH 4 and CO 2 , two greenhouse gases as reactants. However, the deactivation of catalysts due to carbon deposition and sintering is the main drawback of this reaction. In this work, with the aim of minimizing carbon formation and sintering during DRM, the effect of lithium as a promoter in catalysts Ni–Al derived from layered double hydroxides was investigated. The catalysts were prepared by co-precipitation and characterized by different techniques: BET surface area (S BET ), X-ray diffraction (XRD), temperature-programmed reduction (TPR), CO 2 and H 2 temperature-programmed desorption (CO 2 -TPD and H 2 -TPD), Scanning Electron Microscopy (SEM-EDS), temperature-programmed oxidation (TPO). The catalytic tests were carried out in a fixed bed reactor using a synthetic biogas (60% CH 4 and 40% CO 2 ) in the temperature range of 500–750 °C. The incorporation of Li into the Ni–Al-LDH changed the reducibility and basicity of the catalysts. The Li2 sample containing an intermediary amount of Li (5 wt%) showed the highest reduction temperature and highest density of basic sites, which resulted in the smallest Ni crystallite size before and after the reactions. As a result, this catalyst presented the greater resistance to sintering and a lower rate of carbon produced. For the reaction carried out at 700 °C, only the Li2 catalyst remaining active during the test and reaching a maximum of 80% and a final CH 4 conversion of 54% after 480 min of reaction, whereas CO 2 conversion was higher than 90%. All other samples deactivated at different rates due to carbon deposition and sintering.

CO2 Conversion to Synthesis Gas Via DRM on the Durable Al2O3/Ni/Al2O3 Sandwich Catalyst with High Activity and Stability

Revolutionizing CH4-CO2 reforming: Resilient La2O3-Ni@MgAl2O4 catalyst with dual-function synergy

Deciphering the Stability Mechanism of Pt-Ni/Al2O3 Catalysts in Syngas Production Via DRM

Simultaneously Converting CH4 and CO2 to Syngas Using a Novel Pt Doped Ni/MgO-Al2O3 Aerogel Catalyst

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Active and Stable Hydrotalcite Derived Ni Catalysts for CO2 Reforming of Methane: Comparison with Catalysts by Incipient Wetness

Understanding Coke Deposition Vis-à-Vis DRM Activity over Magnesia-Alumina Supported Ni-Fe, Ni-Co, Ni-Ce, and Ni-Sr Catalysts

Effect of Interstitial Carbon Atoms in Core-Shell Ni3ZnC0.7/Al2O3 Catalyst for High-Performance Dry Reforming of Methane

Unbounding the Future: Designing NiAl‐based Catalysts for Dry Reforming of Methane

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Remarkable Basic-Metal Oxides Promoted Confinement Catalysts for CO2 Reforming

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Engineering the Interface and Interaction Structure on Highly Coke-Resistant Ni/CeO<sub>2</sub>-Al<sub>2</sub>O<sub>3</sub> Catalyst for Dry Reforming of Methane

Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane

Dry reforming of methane over Ni/Al2O3 catalysts: Support morphological effect on the coke resistance

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

MOF-derived Carbon-Based Catalysts with Enhanced Anti-Coking Property for the Dry Reforming of Methane

Biogas dry reforming over Li–Ni–Al LDH-derived catalysts

Dry reforming of methane for syngas production over attapulgite-derived MFI zeolite encapsulated bimetallic Ni-Co catalysts

Highly dispersed Ni/Al2O3 catalysts for dry reforming of methane prepared by alkaline-induced adsorption process

CoAl Composite Catalysts Derived from Hydrotalcite-Like Compounds for CH4 Efficient Dry Reforming