Abstract:During the deformation of Mg alloys, {10–12} extension twin often contributes to the formation of basal texture but rarely assists the nucleation of recrystallization, i.e., effective grain refinement, therefore it seems to make against the improvement of formability and mechanical properties. In this work, {10–12} extension twin has been creatively utilized as a preference nucleation site for static recrystallization (SRX), achieving grain refinement and orientation randomization in a Mg-Gd-Y alloy using multi-directional impact forging (MDIF) and subsequent annealing treatment. Effect of {10–12} extension twin on SRX behavior has been investigated by annealing treatment at 450 °C using quasi-in-situ optical microscopy (OM) and quasi-in-situ electron back-scattering diffraction (EBSD). The microstructural evolution during annealing shows that several SRX gains can nucleate from the grain boundary of untwinned grains, but they only have few influences on the final microstructure due to their limited volume faction and sluggish growth. In contrast, a large number of SRX gains can initiate from {10–12} extension twin and grow up without the confine of twin boundaries. Finally, they consume their parent grains and make the main contribution to grain refinement. This should be attributed to those pinned {10–12} twin boundary, by interacting with various dislocation slips during the MDIF process, which can operate like grain boundary, store enough strain energy, and promote the nucleation of SRX during annealing. On the other hand, SRX grains usually keep initial random orientation and further randomize the forging texture during annealing treatment.

Influence of Gibbosity on Recrystallization Behavior of Single Crystal Blade Casting

Experimental Investigation on Plastic Strain and Recrystallization of Single Crystal Nickel Based Superalloys

Recrystallization behavior of a high γ′-fraction Ni-based single crystal superalloy induced by residual strain

Role of As-Cast Dendritic Microstructure in Recrystallization of a Ni-based Single Crystal Superalloy

Microscale Stray Grains Formation in Single-Crystal Turbine Blades of Ni-based Superalloys

Microstructure Simulation on Recrystallization of an As-Cast Nickel Based Single Crystal Superalloy

Effects of Crystal Orientation and External Stress on the Static Recrystallization Behavior of an Ni-Based Single-Crystal Superalloy

Experimental and Numerical Studies on Recrystallization Behavior of Single-Crystal Ni-Base Superalloy

A Model for Simulation of Recrystallization Microstructure in Single-Crystal Superalloy

Hot deformation behavior and flow stress modeling of coarse-grain nickel-base GH4151 superalloy ingot materials in cogging

Microstructure evolution and dynamic recrystallization mechanism during thermal deformation of GH4698 superalloy

Microstructure and Texture Optimization by Static Recrystallization Originating from {10-12} Extension Twins in a Mg-Gd-Y Alloy

Experimental Investigations and Constitutive Modeling of the Dynamic Recrystallization Behavior of a Novel GH4720Li Superalloys with Yttrium Micro-Alloying

Effect of Construction Manner of Mould Cluster on Stray Grain Formation in Dummy Blade of DD6 Superalloy

Simulation and Experiments on Plasticity and Recrystallisation in SX Superalloys by Investment Casting

Modeling of Unidirectional Growth in a Single Crystal Turbine Blade Casting

Microstructural Evolution on the Initiation of Sub-Solvus Recrystallization of A Grit-Blasted Single-Crystal Superalloy

In-situ EBSD investigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy

In Situ Observations and Microstructure Evolution Behavior of Static Recrystallization of Microalloyed Continuous Casting Slabs in a Solidification End Reduction Process

Thermal deformation behavior and dynamic recrystallization mechanism of GH4065A alloy considering the effect of γ′ phase

Investigation on Sub-Solvus Recrystallization Mechanisms in an Advanced γ-γ’ Nickel-Based Superalloy GH4151