A Family of Interferometric Fiber Optic Gyroscopes for Miniaturized Satellites

Jing Jin,Kun Ma,Wei Cai,LingHai Kong

DOI: https://doi.org/10.1364/cleo_at.2018.af1m.2

2018-01-01

Abstract:The compact interferometric fiber optical gyroscope configurations and components, efficient and reliable parameters monitoring and fault diagnosis, performances and in-orbit tests of miniaturized products for space use are presented in this paper.

What problem does this paper attempt to address?

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Junjie Yao,Xuan She,Bei Li,Chenge Wang,Kan Chen,Tenchao Huang,Xiaowu Shu

DOI: https://doi.org/10.1016/j.optcom.2019.07.048

IF: 2.4

2019-01-01

Optics Communications

Abstract:In this paper, we present a full description of the design and fabrication of a compact spot-size converter (SSC) applied to interferometric fiber optic gyroscopes (IFOGs). The obtained SSC has a length of 500 um and a coupling efficiency of 52%. The polarization dependency of the SSC is less than 0.1 dB, and the variation tendencies of our experimental results agree well with a simulation. The SSC possesses many properties suitable for various optical communication and sensing systems, including small size, high coupling efficiency, integration, and high stability.
One-Dimensional Angle Measurement Error Calibration Technique for Fiber Optic Gyroscope

Meng-fang YANG,Lei CHEN,Hui TIAN,Deng-wei ZHANG,Xiao-wu SHU,Shuang-liang CHE

DOI: https://doi.org/10.3969/j.issn.1009-086x.2017.04.003

2017-01-01

Abstract:As the angle measuring error of fiber optic gyroscope increases cumulatively under the condition of long-term operation,a new error calibration method is proposed for fiber optic sensor.The method is based on the principle of optical triangulation distance measurement,using data acquired by two laser displacement sensors to realize the real-time angular measurement,and the experimental verification of the measurement system is carried out on the high-precision turntable.Experimental results show that the range of angle measurement can be up to ± 10°,while the error is about ±0.005° through compensating the error by least square fitting method,which provides the basis for exact estimate of angle measuring precision of gyro.The non-contact optical measurement method used has no damage to the sur face to be measured.
Principle and Application of High Dynamic Fiber Gyroscope

Lei WANG,Xing-fan CHEN,Cheng LIU,Xiao-wu SHU

DOI: https://doi.org/10.3969/j.issn.1009-086x.2017.06.001

2017-01-01

Abstract:A method for designing a high dynamic fiber optic gyroscope (FOG) is presented for a class of high spinning carrier with demand of accuracy and range.It is fulfilled by identification of fringes to detect phase error beyond[-π,+ π] with the dynamic range over 40 000 (°)/s,which provides a new simple,effective and high reliability scheme for light of sight (LOS) stabilization and attitude control of navigation systems.
Research on testing technology based on three-axis diagonal integration of fiber-optic gyro

Yun-peng GUO,Li-jun MIAO,Xiao-wu SHU

DOI: https://doi.org/10.13873/J.1000-9787(2017)12-0022-03

2017-01-01

Abstract:Characteristic testing technology of three-axis diagonal integration of fiber-optic gyro is an important part of high precision intertial navigation.The original calibration method of the scale fator and resolution of three-axis diagonal integration of fiber-optic gyro depends on the tooling and tests the gyro one by one based on the theoretical testing model.The testing time of original method is long and the method is strict in precision of tooling,Aiming at the above problems,put forward a new method that calibrates the scale factor and resolution by measuring installation error and calculating rotation matirx.The experiment proves that the new method can calibrates the scale factor and resolution of all gyro of three-axis diagonal integration of fiber-optic gyro quickly and accurately.The new method has solved the problems of original testing technology for three-axis diagonal integration of fiber-optic gyro being complicated,time-consuming,strict in clamping.
Research on the Feedback Control Characteristics and Parameter Optimization of Closed-Loop Fiber Optic Gyroscope

Jingtao Yan,Lijun Miao,Min Chen,Tengchao Huang,Shuangliang Che,Xiaowu Shu

DOI: https://doi.org/10.1016/j.ijleo.2021.166298

IF: 3.1

2021-01-01

Optik

Abstract:The feedback parameter of closed-loop fiber optic gyroscope (FOG) in various engineering applications is discussed. It has been proved that unreasonable feedback parameter will cause great interference and serious distortion to the output signal. Therefore, we build a concise feedback control mode and obtain optimal range of feedback parameter. For different input signals concerned which nearly include all of the application scenarios in practice, detailed simulations and experiments are completed. The results show that the feedback parameter should be small in static applications and moderate for high response requirements. What is more, it should be relatively small when used in low-bandwidth measurement fields to ensure the response performance of low frequency signal and suppress high frequency noise and vice versa. This work plays an important guiding role for related parameter setting in the feedback control system of sensors, especially for gyroscope.
Scale Factor Calibration and Dynamic Angle Measurement Method Based on Self-Collimator and Fiber Optic Gyroscope

Jiapeng Mou,Tengchao Huang,Guangyao Ying,Shuangliang Che,Xiaowu Shu

DOI: https://doi.org/10.1016/j.yofte.2019.101945

IF: 2.8

2019-01-01

Optical Fiber Technology

Abstract:The scale factor, which the output of the fiber optic gyroscope (FOG) is proportional to, is sensitive to many factors in engineering. When the scale factor fluctuates during the measurement process, it will bring an error to the angle measurement results if the scale factor is not calibrated in time. A scale factor real-time calibration and angle measurement scheme based on self-collimator is proposed to eliminate the error caused by the fluctuation of the scale factor. The experimental results show that the error between the FOG and the rotary table is decreased to nearly 1 '' after adopting the scheme at low angular velocities. Although the error is become larger when the angular velocity is increasing, the angle measurement results can still has a good stability.
Digitalization Study on Test System of Fiber Optic GYRO

DW Zhang,XW Shu,XD Mou,C Liu

DOI: https://doi.org/10.1109/iceice.2012.1084

2012-01-01

Abstract:A portable and high-precision magnetic testing system for optical fiber gyroes with low power consumption is designed and introduced. The magnetic sensitive detector contains a temperature sensor and six hyper sensitized Hall elements that are inlaid into six surfaces of a cube. The Hall elements and temperature sensor turns the magnetic intensity into electrical voltage. After signal conditioning, the analog value is transmitted into digital signal by high-precision analog-digital converter. After demarcated and temperature compensated in FPGA, the transmitted signal will be displayed on the LCD instantly and sent to PC by USB. Via the designed system, a precise survey of magnitude and direction of the magnetic field can be more effectively done. Moreover, direction of the detector can be freely deposited without adjustment.
Vibration Detection and Calibration Method Used to Remote Sensing Optical Camera

Qi Li,Wende Dong,Zhihai Xu,Huajun Feng

DOI: https://doi.org/10.1117/12.2031487

2013-01-01

Abstract:In order to obtain sharp remote sensing images, the image stabilization technology of space camera and the remote sensing image restoration technology are usually used now. Vibration detection is the key to realize these technologies: an image stabilization system needs the displacement vector derived from vibration detection to drive the compensation mechanism; and the remote sensing image restoration technology needs the vibration displacement vector to construct the point spread function (PSF). Vibration detection not only can be used to improve image quality of panchromatic camera, infrared cameras and other optical camera, also is motion compensation basis of satellite radar equipment. In this paper we have constructed a vibration measuring method based on Fiber optic gyro (FOG). FOG is a device sensitive to angular velocity or angular displacement. High-precision FOG can be used to measure the jitter angle of the optic axis of a space camera fixed on satellite platform. According to the measured data, the vibration displacement vector of the imaging plane can be calculated. Consequently the vibration data provide a basis for image stabilization of space camera and restoration of remote sensing images. We simulated the vibration of a space camera by using a piezoelectric ceramic deflection platform, and calibrated vibration measurement by using laser beam and a high-speed linear array camera. We compared the feedback output of the deflection platform, the FOG measured data and the calibrated data of the linear array camera, and obtained a calibration accuracy better than 1.5 mu rad.
Review of Development of Interferometric Fiber-Optic Gyroscopes

Qiu Jialuo,Wang Lei,Huang Tengchao,Shu Xiaowu

DOI: https://doi.org/10.3788/AOS202242.1706004

2022-01-01

Acta Optica Sinica

Abstract:Since the 1970s, the interferometric fiber-optic gyroscope (IFOG) technology based on the Sagnac effect which boasts unique advantages, has developed rapidly with the increasing application and maturity of optical devices such as optical fibers, light sources, and phase modulators in optical communication. Over the past 40 years, this technology has moved from the laboratory to various practical fields such as land, sea, air, and space. This paper reviews the recent development of the IFOG technology. Firstly, the exploration process of this technology from the birth of the Sagnac effect to its practical applications is introduced. Secondly, the classical minimum reciprocity configuration of IFOGs and the signal processing scheme are described. Then, the research status of this technology in high precision , miniaturization , and application environment adaptability is summarized. Finally, the development and application trends of this technology are analyzed.
Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

Junjie Yao,Ke Li,Bei Li,Chenge Wang,Chen Kan,Xuan She,Xiaowu Shu

DOI: https://doi.org/10.1109/jlt.2018.2875795

IF: 4.7

2018-01-01

Journal of Lightwave Technology

Abstract:In this paper, we theoretically analyze the wavelength temperature stability of multifunctional integrated optical chips (MIOCs) applied on fiber optic gyroscopes (FOGs). This study is critical for improving the temperature stability of the FOG scale factor, which is a significant parameter used to evaluate the dynamic characteristics of FOGs. Analytical and multiphysics simulations uncover two significant new predictions. First, changes in environmental temperature can lead to misalignment of the coupling structure between the chip and fiber, which is the main reason for the deterioration of the MIOC wavelength temperature stability. Second, misalignment caused by temperature changes is related to the initial alignment parameters of the coupling structure. Therefore, we can effectively improve the wavelength temperature stability of an MIOC by correctly choosing the initial alignment state of the coupling structure. Space coupling experiments are also presented to verify these predictions, and the experimental and simulation results are in good agreement.
The New Demodulate Technology of Fiber Optics Gyroscope

XW Shu,C Liu,CH Mao

DOI: https://doi.org/10.1109/wcica.2000.863482

2000-01-01

Abstract:The measurement of rotation is of considerable interest in a number of areas. It is not only used in aircraft but also in new application fields such as automobile navigation, antenna/camera stabilizer, crane control, unmanned vehicle control. The FOG with scanning phase-shift based on anti-noise filter circuit and improved DSP-software algorithm, and the FOG using scanning phase-shift modulation are presented in the paper. The results of experiment show that the proposed FOG is insensitive to interference intensity and changes of light contrast, the stability of FOG is improved greatly
Design of Infrared Static Focal Plane Earth Sensor for Micro-Satellite

SHEN Guoquan,WANG Hao,GUO Zhendong,JIN Zhonghe

DOI: https://doi.org/10.3969/j.issn.1004-1699.2012.05.003

2012-01-01

Abstract:Infrared earth sensors are an important component of satellite attitude determination and control systems.Traditional infrared earth sensors based on swing scanning technique have a lot of disadvantages,including bulky,high power consumption and low precision,being unable to meet the requirements of micro-satellites.In order to overcome these disadvantages,this paper presents a design of the earth sensor based on infrared focal plane and corresponding methods of testing and calibration.This earth sensor has the following features:small size,simple structure and low power consumption.According to theory of operation,this paper presents its entire architecture with hardware and software design.A model was established and a platform was constructed for the calibration and test.The results show that the earth senor has a precision of 0.1°,which meets the requirement of attitude determination system of micro-satellites.
A Fusion Algorithm for Pico-Satellite Attitude Determination Using Low Cost Mems-Based Sensors

MENG Tao,WANG Hao,JIN Zhong-he,HAN Ke

DOI: https://doi.org/10.3873/j.issn.1000-1328.2009.04.043

2009-01-01

Abstract:This paper presents a novel sensing methodology with an unscented Kalman-based fusion algorithm for attitude estimation,using inexpensive MEMs gyroscopes,sun sensor and magnetometer.Considering the potential failure mode,the back-up filter algorithm using only magnetometer is proposed.Three-component modified Rodrigues parameters are used to describe attitude vector,which avoids the singularity of the covariance matrix when using unit quaternion in attitude determination.Using the ground test of gyro drift data,hardware-in-loop simulation shows that the proposed methodology can obtain fine attitude estimation,even only magnetometer is available,the back-up filter can still meets the requirements of the ordinary mission.The work shows profound meaning in the engineering application.This paper can be seen as a positive exploration of low precision MEMS sensors application to low cost pico-satellite.
Infrared Earth Sensor with a Large Field of View for Low-Earth-orbiting Micro-Satellites

Wang Hao,Wang Zhi-yuan,Wang Ben-dong,Jin Zhong-he,Crassidis John L.

DOI: https://doi.org/10.1631/fitee.1900358

2020-01-01

Abstract:Infrared Earth sensors are widely used in attitude-determination and control systems of satellites. The main deficiency of static infrared Earth sensors is the requirement of a small field of view (FOV). A typical FOV for a static infrared Earth sensor is about 20° to 30°, which may not be sufficient for low-Earth-orbiting micro-satellites. A novel compact infrared Earth sensor with an FOV of nearly 180° is developed here. The Earth sensor comprises a panoramic annular lens (PAL) and an off-the-shelf camera with an uncooled complementary-metal-oxide-semiconductor (CMOS) infrared sensor. PAL is used to augment FOV so as to obtain a complete infrared image of the Earth from low-Earth-orbit. An algorithm is developed to compensate for the distortion caused by PAL and to calculate the vector of the Earth. The new infrared Earth sensor is compact with low power consumption and high precision. Simulated images and on-orbit infrared images obtained via the micro-satellite ZDPS-2 are used to assess the performance of the new infrared Earth sensor. Experiments show that the accuracy of the Earth sensor is about 0.032°.
Dynamic Data Acquisition and Processing of Yawing Angle Based on Fiber-Optic Gyro Orientation

GU Zheng-hua,WANG Fan,HAN Jie,WANG Fei

DOI: https://doi.org/10.3969/j.issn.1000-8829.2011.06.009

2011-01-01

Abstract:In the measurements of the yawing angle based on fiber-optic gyroscope,the dynamic data acquisition and processing is the key and difficult point.According to the model of data of in-out characteristic of fiber optic gyroscope,the test data is described by the ARMA model dealt with Simpson integration.These are meaningful to advance the precision of fiber optic gyroscope.
Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

Shuangxiang Zhao,Qingwen Liu,Yuanyuan Liu,Huilian Ma,Zuyuan He

DOI: https://doi.org/10.1364/prj.443496

IF: 7.6

2021-01-01

Photonics Research

Abstract:The miniaturization of the gyroscope is critical for spacecrafts, drones, wellbore surveys, etc. The resonant fiber-optic gyroscope (RFOG) is a competitive candidate due to its potential in both miniaturization and high resolution, while its actual performance is well below expectation because of laser-induced noise and complexity. Here we report the first navigation grade RFOG with a bias instability of 0.009°/h and an angle random walk of 0.0093°/ h . The results are realized using a fiber resonator with finesse of 63 containing 100-m long fiber. Compared with the traditional RFOGs using narrow-linewidth lasers, the key feature of the proposed RFOG is that it is driven with a broadband light source. A white-light multibeam interference method is proposed to detect the Sagnac effect, representing the simplest scheme of RFOG to date. The complexity caused by multiple feedback loops and coherent noise suppression in traditional RFOG scheme is avoided. The minimal scheme and simple modulation algorithm will also promote the on-chip waveguide gyroscope.
A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

Yu Xu,Wenda Sun,Ping Li

DOI: https://doi.org/10.1155/2014/748940

IF: 1.4

2014-01-01

International Journal of Aerospace Engineering

Abstract:This paper presents the development of a low cost miniature navigation system for autonomous flying rotary-wing unmanned aerial vehicles (UAVs). The system incorporates measurements from a low cost single point GPS and a triaxial solid state inertial/magnetic sensor unit. The navigation algorithm is composed of three modules running on a microcontroller: the sensor calibration module, the attitude estimator, and the velocity and position estimator. The sensor calibration module relies on a recursive least square based ellipsoid hypothesis calibration algorithm to estimate biases and scale factors of accelerometers and magnetometers without any additional calibration equipment. The attitude estimator is a low computational linear attitude fusion algorithm that effectively incorporates high frequency components of gyros and low frequency components of accelerometers and magnetometers to guarantee both accuracy and bandwidth of attitude estimation. The velocity and position estimator uses two cascaded complementary filters which fuse translational acceleration, GPS velocity, and position to improve the bandwidth of velocity and position. The designed navigation system is feasible for miniature UAVs due to its low cost, simplicity, miniaturization, and guaranteed estimation errors. Both ground tests and autonomous flight tests of miniature unmanned helicopter and quadrotor have shown the effectiveness of the proposed system, demonstrating its promise in UAV systems.
Resonator Fiber Optic Gyroscope with an All Digitalized System

Xuhui Yu,Huilian Ma,Jin, Zhonghe

DOI: https://doi.org/10.1109/isscaa.2010.5633090

2010-01-01

Abstract:Resonator fiber optic gyroscope has the potential to achieve the inertial navigation system requirement with a short sensing coil. An all digitalized system is constructed including the signal modulation/demodulation and a proportional integral (PI) controller in a single field programmable gate array. Under this scheme, the serrodyne phase modulation technique is adopted, which is of benefit to overcome the backscattering induced noise and easy to implement in closed-loop operation. The phase modulation index is optimized to achieve high carrier suppression. The PI controller is adopted in the frequency servo loop to eliminate the residual error at the lock-in frequency. A bias stability of 5.2×10-4 rad/s in 500 seconds is demonstrated experimentally.
Research Progress of the Resonant Fiber Optic Gyroscope Technology

Linglan Wang,Yuchao Yan,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1117/12.2197580

2015-01-01

Abstract:The resonant fiber optic gyro (RFOG) is a high accuracy inertial rotation sensor based on the Sagnac effect. The existence of various noises, including the nonreciprocal noises such as the polarization noise and the Kerr noise as well as the reciprocal circuit noise, limits the performance improvement of the RFOG. An improved scheme by inserting two in-line polarizers in the polarization maintaining fiber transmission-type resonator has been proposed to suppress the polarization-fluctuation induced drift. Furthermore, the adoption of the air-core photonic bandgap fibers (PBFs) offers a novel solution to reduce the optical Kerr effect. In addition, A digital signal processor is designed to reduce the reciprocal noises and detect the rotation information. A minimum actual rotation of 0.001°/s is achieved. The dynamic range is improved by a factor of 7 and the scale factor nonlinearity is decreased by a factor of 60.
Development and Evaluation of Optical Passive Resonant Gyroscopes

Huilian Ma,Jianjie Zhang,Linglan Wang,Zhonghe Jin

DOI: https://doi.org/10.1109/jlt.2016.2587667

IF: 4.7

2017-01-01

Journal of Lightwave Technology

Abstract:In this paper, the development and evaluation of passive optical ring resonator gyroscopes (OPRGs) are critical reviewed. Attention has been paid to the countermeasures against the parasitic noise sources which are encountered in the OPRG including backscattering, backreflection, polarization error, nonlinear Kerr effect, and laser frequency noise. The new progress in a feasible OPRG is shown. In addition, the advanced and complex digital signal processing in the OPRGs is also addressed.

A Family of Interferometric Fiber Optic Gyroscopes for Miniaturized Satellites

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

One-Dimensional Angle Measurement Error Calibration Technique for Fiber Optic Gyroscope

Principle and Application of High Dynamic Fiber Gyroscope

Research on testing technology based on three-axis diagonal integration of fiber-optic gyro

Research on the Feedback Control Characteristics and Parameter Optimization of Closed-Loop Fiber Optic Gyroscope

Scale Factor Calibration and Dynamic Angle Measurement Method Based on Self-Collimator and Fiber Optic Gyroscope

Digitalization Study on Test System of Fiber Optic GYRO

Vibration Detection and Calibration Method Used to Remote Sensing Optical Camera

Review of Development of Interferometric Fiber-Optic Gyroscopes

Study of Wavelength Temperature Stability of Multifunctional Integrated Optical Chips Applied on Fiber Optic Gyroscopes

The New Demodulate Technology of Fiber Optics Gyroscope

Design of Infrared Static Focal Plane Earth Sensor for Micro-Satellite

A Fusion Algorithm for Pico-Satellite Attitude Determination Using Low Cost Mems-Based Sensors

Infrared Earth Sensor with a Large Field of View for Low-Earth-orbiting Micro-Satellites

Dynamic Data Acquisition and Processing of Yawing Angle Based on Fiber-Optic Gyro Orientation

Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

Resonator Fiber Optic Gyroscope with an All Digitalized System

Research Progress of the Resonant Fiber Optic Gyroscope Technology

Development and Evaluation of Optical Passive Resonant Gyroscopes