Abstract:Digital nucleic acid amplification provides unprecedented opportunities for absolute nucleic acid quantification by counting of single molecules. This technique is useful for molecular genetic analysis in cancer, stem cell, bacterial, non-invasive prenatal diagnosis in which many biologists are interested. This paper describes a self-priming compartmentalization (SPC) microfluidic chip platform for performing digital loop-mediated amplification (LAMP). The energy for the pumping is pre-stored in the degassed bulk PDMS by exploiting the high gas solubility of PDMS; therefore, no additional structures other than channels and reservoirs are required. The sample and oil are sequentially sucked into the channels, and the pressure difference of gas dissolved in PDMS allows sample self-compartmentalization without the need for further chip manipulation such as with pneumatic microvalves and control systems, and so on. The SPC digital LAMP chip can be used like a 384-well plate, so, the world-to-chip fluidic interconnections are avoided. The microfluidic chip contains 4 separate panels, each panel contains 1200 independent 6 nL chambers and can be used to detect 4 samples simultaneously. Digital LAMP on the microfluidic chip was tested quantitatively by using beta-actin DNA from humans. The self-priming compartmentalization behavior is roughly predictable using a two-dimensional model. The uniformity of compartmentalization was analyzed by fluorescent intensity and fraction of volume. The results showed that the feasibility and flexibility of the microfluidic chip platform for amplifying single nucleic acid molecules in different chambers made by diluting and distributing sample solutions. The SPC chip has the potential to meet the requirements of a general laboratory: power-free, valve-free, operating at isothermal temperature, inexpensive, sensitive, economizing labour time and reagents. The disposable analytical devices with appropriate air-tight packaging should be useful for point-of-care, and enabling it to become one of the common tools for biology research, especially, in point-of-care testing.

A PDMS-based Digital PCR Chip with Vacuum Aspiration and Water-Filling Cavity Integrated for Sample Loading and Evaporation Reduction

A self-digitization chip integrated with hydration layer for low-cost and robust digital PCR

A Self-Priming Microfluidic Chip with Cushion Chambers for Easy Digital PCR

Complete Prevention of Bubbles in a PDMS-Based Digital PCR Chip with a Multifunction Cavity

Digital PCR chip based on PDMS spherical cavity array

A nanoliter self-priming compartmentalization chip for point-of-care digital PCR analysis

A Microfluidic Chip Based on Surfactant-Doped Polydimethylsiloxane (PDMS) in a Sandwich Configuration for Low-Cost and Robust Digital PCR

Digital PCR on an integrated self-priming compartmentalization chip

A Multi-Volume Microfluidic Device with No Reagent Loss for Low-Cost Digital PCR Application

A Double-Deck Self-Digitization Microfluidic Chip for Digital PCR

Fast and Robust Sample Self-Digitization for Digital PCR.

A microfluidic alternating-pull-push active digitization method for sample-loss-free digital PCR.

A New Method for Polydimethylsiloxane (PDMS) Microfluidic Chips to Maintain Vacuum-Driven Power Using Parylene C

Assembled Step Emulsification Device for Multiplex Droplet Digital Polymerase Chain Reaction

A vacuum-assisted, highly parallelized microfluidic array for performing multi-step digital assays

Easy-to-Operate Co-flow Step Emulsification Device for Droplet Digital Polymerase Chain Reaction

An integrated temporary negative pressure assisted microfluidic chip for DNA isolation and digital PCR detection

Self-Priming Compartmentalization Digital Lamp For Point-Of-Care

A Silicon-Based PDMS-PEG Copolymer Microfluidic Chip for Real-Time Polymerase Chain Reaction Diagnosis

Design and Experiment of a PDMS-based PCR Chip with Reusable Heater of Optimized Electrode

Rapid in Situ Photoimmobilization of a Planar Droplet Array for Digital PCR