Abstract:The solidification of contaminants within the soil/waste has proved to be a versatile technique to de-contaminate them and make them usable for several applications. In this method, the development of binder provisions leads to the conversion of the environmentally unstable condition of waste materials into a nearly stable material. Further, these materials pose a minimum threat that can be absorbed into the environment. Normally lime/cement and other pozzolanic materials are used as binder materials. In this work, it is proposed to use the efficiency of binding fly ash to improve the unconfined compressive strength (UCC) of soils, particularly during the curing period. This is because improvement in strength is a reflection of the improvement of bonding soil particles. Fly ash as the main source material, in addition to a minor proportion of cement and lime, is used to determine the strength. UCC test results revealed that as the percentage of fly ash increases there is an increase in compressive strength. It is also observed that with an increase in lime content and an increase in cement content, the UCC strength also increases. The strength in cement-stabilized compacted specimens is more compared to lime-stabilized mixtures. To confirm that the improvement in strength is related to the solidification of contaminated metals, particularly for soils containing copper and chromium, the stabilized mixture is tested for the leaching of these metals. Leaching tests were conducted on various stabilized mixtures at different curing periods. The leachate was examined for metal ion concentration using Atomic Absorption Spectrophotometer. The leaching behavior of heavy metals from different proportions of soil matrix revealed that with an increase in lime or cement percentage, a decrease in leachability is observed. It is found that the leaching of heavy metals from cement-stabilized soils was lower than in lime mixture combinations. However, minimum strength improves the solidification and retention of heavy metals effectively.

Investigation of Fly Ash for Sorption of Copper Ions in Multiple Contaminant System: an Implication on Re-Use of Waste Material under Concept of Sponge City

Understanding the retention and fate prediction of copper ions in single and competitive system in two soils: An experimental and numerical investigation

Exploring Potential of Fly Ash–Bentonite Mix As a Liner Material in Waste Containment Systems under Concept of Sponge City

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Optimization of copper removal from wastewater by fly ash using central composite design of Response surface methodology

Adsorption of Metal Ions in Wastewater on Fly Ash

A thorough investigation into the adsorption behavior of sophorolipid-modified fly ash towards compound pollution of lead and tetracycline

Adsorption Properties of Fly Ash Towards Bivalent Metal Ions

Optimization of copper adsorption by chemically modified fly ash using response surface methodology modeling

Fabrication and Application of Low-Cost Thiol Functionalized Coal Fly Ash for Selective Adsorption of Heavy Toxic Metal Ions from Water

Assessment of heavy metals mobility and correlative recovery and decontamination from MSWI fly ash: Mechanism and hydrometallurgical process evaluation

Adsorption of heavy metal ions from aqueous solution by fly ash

Retention Behaviour of Heavy Metals from Industrial Sludge Amended with Admixtures to Use Them as Liners for Landfill Facilities

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

A study on removal characteristics of heavy metals from aqueous solution by fly ash

Synthesis of porous materials by the modification of coal fly ash and its environmentally friendly use for the removal of heavy metals from wastewater

Investigation of Cu Leaching from Municipal Solid Waste Incinerator Bottom Ash with a Comprehensive Approach

Treatment of Fly-Ash-Contaminated Wastewater Loaded with Heavy Metals by Using Fly-Ash-Synthesized Iron Oxide Nanoparticles

Co-disposal of Heavy Metals Containing Waste Water and Medical Waste Incinerator Fly Ash by Hydrothermal Process with Addition of Sodium Carbonate: A Case Study on Cu(II) Removal

Arsenic and copper stabilisation in a contaminated soil by coal fly ash and green waste compost

Stabilization of lead in waste water and farmland soil using modified coal fly ash