Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Hydrogen storage properties of Y-Mg-Cu-H nanocomposite obtained by hydrogen-induced decomposition of YMg 4 Cu intermetallic

Catalytic Effect of in Situ Formed Nano-Mg2ni and Mg2Cu on the Hydrogen Storage Properties of Mg-Y Hydride Composites

In-situ Hydrogen-Induced Evolution and De-/Hydrogenation Behaviors of the Mg93Cu7-Y Alloys with Equalized LPSO and Eutectic Structure

Hydrogen Storage Properties of Nano-Cob/cnts Catalyzed MgH2

Hydrogen desorption properties of the MgH2-AlH3 composites

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Carbon composite support improving catalytic effect of NbC nanoparticles on the low-temperature hydrogen storage performance of MgH2

Enhanced Hydrogen Storage Properties of MgH2 by the Synergetic Catalysis of Zr0.4Ti0.6Co Nanosheets and Carbon Nanotubes

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Hydrogen Storage Properties of a Mg–Ni Nanocomposite Coprecipitated from Solution

Hydrogen storage properties of Mg–Nb@C nanocomposite: Effects of Nb nanocatalyst and carbon nanoconfinement

Enhanced Hydrogen Storage Kinetics And Stability By Synergistic Effects Of In Situ Formed Ceh2.73 And Ni In Ceh2.73-Mgh2-Ni Nanocomposites

In Situ Embedding Of Mg2nih4 And Yh3 Nanoparticles Into Bimetallic Hydride Namgh3 To Inhibit Phase Segregation For Enhanced Hydrogen Storage

Hydrogen Storage Properties of Mg-based Materials with CNTs

Hydrogen Storage Properties of LaMg4Cu

Preparation and hydrogen storage properties of Mg-20 wt.% Mg 2Ni0.8Cr0.2 composite with TiO2 nanoparticles

Hydrogen storage properties of nanocomposite Mg–Ni–Cu–CrCl3 prepared by mechanical alloying

Interactions of Y and Cu on Mg2Ni type hydrogen storage alloys: A study based on experiments and density functional theory calculation

Preparation and hydrogen storage properties of nanostructured Mg2Cu alloy

Facilitated Hydrogen Storage Properties of MgH2 by Ni Nanoparticles Anchored on Mo2C@C Nanosheets

Hydrogen Storage Properties of Nanocomposite Mg-Ni-MnO2 Made by Mechanical Milling