Abstract:This paper presents a detailed investigation of the dry clutch engagement process, and vehicle start-up judder phenomenon that could result in the deterioration of vehicle ride comfort. Elasto-plastic friction model is elaborated through the slider-pulley system, which shows some friction characteristics such as presliding, stick-slip motion, Stribeck effects, etc., and applied to dry clutch. The axial compression characteristics of three elastic parts, which include diaphragm spring, cushion spring, and link strip have been taken into consideration, and nonlinear relationship between the release bearing travel and the clutch clamp force is also established. The powertrain system model of front-engine and front-wheel-drive vehicle equipped with manual transmission is set up to recreate the start-up judder phenomenon in the numerical simulation and analyze its mechanism. The sudden transfer of the engine torque during the clutch engagement process results in the initial judder, which can be supposed as the step response of system and is initially weakened due to the damping of the powertrain system. Then the judder gradually strengthens and gets in the most severe vibrance when the clutch is about to get in to the fully engaged state, which is related to the frictional characteristics that forms a closed-loop positive feedback system, as well as the frequent state transitions between sliding state and engaged state. The positive slope of Stribeck effect as well as the reduction of absolute value of negative slope can both effectively suppress the start-up judder, and the apparent judder occurs only if the negative slope is outside of a certain range, instead of in all of the range. In addition, the fluctuation of clutch clamp force can aggravate the start-up judder, in which a more chaotic oscillation is emerged.

Modeling and Analysis of Friction Clutch at a Driveline for Suppressing Car Starting Judder

Analysis of Clutch Engagement Judder and Its Influence Factors

Dynamic analysis of vehicle start-up judder based on elasto-plastic friction model and dry clutch maneuvering characteristic

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Study of the Judder Characteristics of Friction Material for an Automobile Clutch and Test Verification

Effects of vehicle driveline parameters and clutch judder on gearbox vibrations

Clutch Engagement Control Based on Stability Analysis

Model referenced adaptive control to compensate slip-stick transition during clutch engagement

Thermo-Mechanical Coupling Characteristics of Dry Clutch Under Different Automotive Starting Modes

Modeling and Stability Analysis of Wedge Clutch System

Influence of the driving environment on the dynamic characteristics of a DCT vehicle starting considering the longitudinal and vertical coupling model

Control-oriented modeling of wet clutch friction considering thermal dynamics

Modeling and analysis of bending and torsional coupling vibration response of multi-piece wet friction clutch

Analysis on the Engaging Process of Vehicle Clutch

A Nonlinear Control for Clutches with Multistage Vibroisolation

Stability Analysis of Motor-Driven Actuators in Dry Clutches with Nonlinear Stiffness Element.

Improved Clutch Slip Control for Automated Transmissions

Modeling and Simulation Study of a Novel Electromechanical Clutch Actuation System