Abstract:Fin-and-tube heat exchanger is the most commonly used heat exchanger type in air-conditioning systems. In the actual operation of air-conditioning systems, the dust particles involved in the air may partly deposit and form particulate fouling on fins and tubes when the dusty air flows through the heat exchangers. The deposited particles may gradually block the passageway of air flow and occupy the heat transfer area, which results in the continuous increase of air side thermal resistance and the significant deterioration of the heat transfer capacity of heat exchangers during the longterm operation. In order to quickly evaluate the long-term performance of fin-and-tube heat exchangers, an accelerating-particle-deposition method, which is capable of implementing the particle deposition process on the longrunning heat exchangers in a short time, is proposed in this study. The idea of the accelerating-particle-deposition method is to employ high concentration dusty air flow through heat exchangers in the accelerated test, and to quickly form the particulate fouling with the same weight as that on longrunning heat exchangers under the actual operating environment with low particle concentration. The accelerating factor, which is defined as the ratio of the actual running time to the accelerated testing time, is calculated based on the deposition weight of dust particles. The deposition weight is calculated by the relationship of the impact frequency and deposition probability of dust particles with the dust feed rate of dusty air. An experimental apparatus for accelerating the particle deposition process and testing the heat transfer capacity of finand-tube heat exchangers is designed. The accelerating factor is fitted by the experimental data, and the mean deviation of the accelerating factor is 16.3%.

An Analytical Model for Predicting the Particle-Deposited Fin Efficiency

Numerical Model of Particle Deposition on Fin Surface of Heat Exchanger

Numerical Model of Particle Deposition on Wet Fin Surfaces of Heat Exchanger under Dehumidifying Conditions

A Numerical Model for Predicting Particle Collection Efficiency of Electrostatic Precipitators

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection

Fouling characteristics analysis and morphology prediction of heat exchangers with a particulate fouling model considering deposition and removal mechanisms

Influence of Wet-Particle Deposition on Air-Side Heat Transfer and Pressure Drop of Fin-and-tube Heat Exchangers

Numerical model of dusty-water bridge forming between neighbor fins of fin-and-tube heat exchangers

Experimental Study of Particle Deposition Characteristics on Wavy Finned-tube Heat Exchanger

Experimental investigation on particle deposition characteristics of wavy fin-and-tube heat exchangers

Accelerating-particle-deposition Method for Quickly Evaluating Long-term Performance of Fin-and-tube Heat Exchangers

Condensing droplet behaviors on fin surface under dehumidifying condition: Part I: Numerical model

Experimental Investigation on Influence of Fin Structures on Particle Deposition and Pressure Drop of Fin-and-tube Heat Exchangers

Two-dimensional numerical model for predicting fouling shape growth based on immersed boundary method and lattice Boltzmann method

A Parameter Study of Tube Bundle Heat Exchangers for Fouling Rate Reduction

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical Analysis Of Composite Fouling In Corrugated Plate Heat Exchanger

General Prediction of the Thermal Hydraulic Performance for Plate-Fin Heat Exchanger with Offset Strip Fins

Numerical Model of Condensate Water Droplet Motion on Fin Surface under Dehumidifying Conditions

A numerical model for convective-condensation heat transfer of flue gas and its application on fin efficiency calculation

Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number