Methane Activation over a Boron Nitride Catalyst Driven by in Situ Formation of Molecular Water

Yang Wang,Liyang Zhao,Lei Shi,Jian Sheng,Weiping Zhang,Xiao-Ming Cao,Peijun Hu,An-Hui Lu

DOI: https://doi.org/10.1039/c8cy00163d

IF: 6.177

2018-01-01

Catalysis Science & Technology

Abstract:Boron nitride converts methane to valuable chemicals through a H2O-assisted O2 and CH4 synergetic mutual activation mechanism.

What problem does this paper attempt to address?

Methane Activation by the Heteronuclear Cluster [TiAlO<sub>4</sub>]<SUP>+</SUP>: Direct Hydrogen Abstraction by a Nonradical Oxygen

Lei Wu,Xin Ge,Shi-Ya Tang,Shaodong Zhou

DOI: https://doi.org/10.1021/acs.jpclett.1c03464

2021-01-01

Abstract:The gas-phase reactions of [TiAlO4](+) with methane have been explored by using FTICR mass spectrometry complemented by quantum chemical calculations. Interestingly, the [TiAlO4](+) ions can activate two methane molecules continuously. Moreover, in contrast to the previous reports on gas-phase methane activation by metal oxide clusters, in which hydrogen-atom transfer and/or proton-coupled electron transfer prevail, a hydride transfer process dominates the [TiAlO4](+)/CH4 system. The associated electronic origins have been discussed, and such a terminal metal-oxo active center as addressed in the [TiAlO4](+) cluster has proven to be promising in the construction of efficient catalysts concerning methane conversion.
A Novel Mechanism of Activation of Methane over Metal-Free Hexagonal Boron Nitride Catalyst

Li-yang Zhao,Xiao-ming Cao

2017-01-01

Abstract:Hexagonal Boron nitride (h-BN) is an emerging metal-free catalyst for oxidative dehydrogenation of alkanes. In this work, we demonstrated that h-BN catalyst be able to catalyze the oxidative conversion of methane, and a novel H2O-assisted O2 and CH4 synergetic mutual activation mechanism was proposed.
Methane activation by a borenium complex

Yizhen Liu,Weishi Dong,Zhen Hua Li,Huadong Wang

DOI: https://doi.org/10.1016/j.chempr.2021.03.010

IF: 23.5

2021-07-01

Chem

Abstract:The selective functionalization of methane under ambient conditions remains a formidable challenge for chemists. While most studies have focused on transition metal complexes, much less attention has been devoted to molecular complexes based on non-metal elements, despite them being more sustainable and less environmentally impactful. Here, we report that an N-heterocyclic carbene-stabilized borenium complex can activate methane under relatively mild conditions. The resulting methylborenium complex can readily transfer the methyl group to catecholborane (HBcat), which can lead to a synthetic cycle for the conversion of methane to MeBcat. Both experimental and theoretical mechanistic studies suggest that the C–H bonds of methane are activated via a σ-bond metathesis pathway. Such direct aliphatic C–H borylation can be extended to other alkanes, such as ethane and octane. The formed alkylborenium complexes can react with terminal alkynes via 1,2-alkylboration to install both the alkyl and boryl functionalities onto organic scaffolds.

chemistry, multidisciplinary
Mechanistic Insights into Radical-Induced Selective Oxidation of Methane over Nonmetallic Boron Nitride Catalysts

Peijie Han,Ran Yan,Yuqing Wei,Leisu Li,Jinsong Luo,Yang Pan,Binju Wang,Jingdong Lin,Shaolong Wan,Haifeng Xiong,Yong Wang,Shuai Wang

DOI: https://doi.org/10.1021/jacs.2c13648

IF: 15

2023-05-03

Journal of the American Chemical Society

Abstract:Boron-based nonmetallic materials (such as B(2)O(3) and BN) emerge as promising catalysts for selective oxidation of light alkanes by O(2) to form value-added products, resulting from their unique advantage in suppressing CO(2) formation. However, the site requirements and reaction mechanism of these boron-based catalysts are still in vigorous debate, especially for methane (the most stable and abundant alkane). Here, we show that hexagonal BN (h-BN) exhibits high selectivities to formaldehyde...

chemistry, multidisciplinary
Screening Performance of Methane Activation over Atomically Dispersed Metal Catalysts on Defective Boron Nitride Monolayers: A Density Functional Theory Study

Xiao-Ming Cao,Haijin Zhou,Liyang Zhao,Xuning Chen,Peijun Hu

DOI: https://doi.org/10.1016/j.cclet.2020.09.015

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:Methane (CH4) controllable activation is the key process for CH4 upgrading, which is sensitive to the surface oxygen species. The high thermal conductivity and superb thermal stability of the hexagonal boron nitride (h-BN) sheet makes a single transition metal atom doped hexagonal boron nitride monolayer (TM-BN) possible to be a promising material for catalyzing methane partial oxidation. The performances of 24 TM-BNs for CH4 activation are systematically investigated during the CH4 oxidation by means of first-principles computation. The calculation results unravel the periodic variation trends for the stability of TM-BN, the adsorption strength and the kind of O2 species, and the resulting CH4 activation performance on TM-BNs. The formed peroxide O22− of which the OO bond could be broken and O− anions are found to be reactive oxygen species for CH4 activation under the mild conditions. It is found that the redox potential of TM center, including its valence electron number, coordination environment, and the work function of TM-BN, is the underlying reason for the formation of different oxygen species and the resulting activity for CH4 oxidative dehydrogenation.
Direct conversion of methane to formaldehyde and CO on B2O3 catalysts

Jinshu Tian,Jiangqiao Tan,Zhaoxia Zhang,Peijie Han,Min Yin,Shaolong Wan,Jingdong Lin,Shuai Wang,Yong Wang

DOI: https://doi.org/10.1038/s41467-020-19517-y

IF: 16.6

2020-11-10

Nature Communications

Abstract:Abstract Direct oxidation of methane to value-added C 1 chemicals (e.g. HCHO and CO) provides a promising way to utilize natural gas sources under relatively mild conditions. Such conversions remain, however, a key selectivity challenge, resulting from the facile formation of undesired fully-oxidized CO 2 . Here we show that B 2 O 3 -based catalysts are selective in the direct conversion of methane to HCHO and CO (~94% selectivity with a HCHO/CO ratio of ~1 at 6% conversion) and highly stable (over 100 hour time-on-stream operation) conducted in a fixed-bed reactor (550 °C, 100 kPa, space velocity 4650 mL g cat −1 h −1 ). Combined catalyst characterization, kinetic studies, and isotopic labeling experiments unveil that molecular O 2 bonded to tri-coordinated BO 3 centers on B 2 O 3 surfaces acts as a judicious oxidant for methane activation with mitigated CO 2 formation, even at high O 2 /CH 4 ratios of the feed. These findings shed light on the great potential of designing innovative catalytic processes for the direct conversion of alkanes to fuels/chemicals.

multidisciplinary sciences
Activation and Conversion of Methane to Syngas over ZrO2/Cu(111) Catalysts near Room Temperature

Erwei Huang,Ning Rui,Rina Rosales,Ping Liu,José A Rodriguez

DOI: https://doi.org/10.1021/jacs.3c01980

2023-04-05

Abstract:Enzymatic systems achieve the catalytic conversion of methane at room temperature under mild conditions. In this study, varying thermodynamic and kinetic parameters, we show that the reforming of methane by water (MWR, CH4 + H2O → CO + 3H2) and the water-gas shift reaction (WGS, CO + H2O → H2 + CO2), two essential processes to integrate fossil fuels toward a H2 energy loop, can be achieved on ZrO2/Cu(111) catalysts near room temperature. Measurements of ambient-pressure X-ray photoelectron spectroscopy and mass spectrometry, combined with density functional calculations and kinetic Monte Carlo simulations, were used to study the behavior of the inverse oxide/metal catalysts. The superior performance is associated with a unique zirconia-copper interface, where multifunctional sites involving zirconium, oxygen, and copper work coordinatively to dissociate methane and water at 300 K and move forward the MWR and WGS processes.
Mapping the Catalytic‐Space for the Reactivity of Metal‐free Boron Nitride with O2 for H2O‐Mediated Conversion of Methane to HCHO and CO

Parveen Rawal,Puneet Gupta

DOI: https://doi.org/10.1002/chem.202303371

2024-01-17

Chemistry - A European Journal

Abstract:Transition‐metal based catalysts have been widely employed to catalyze partial oxidation of light alkanes. Recently, metal‐free hexagonal‐boron nitride (h‐BN) has emerged as a promising catalyst for the oxidation of CH4 to HCHO and CO; however, the intricate catalytic surface of h‐BN at molecular and electronic levels remains inadequately understood. Key questions include how electron‐deficient boron atoms in h‐BN reduce O2, and whether the partial oxidation of methane over h‐BN exhibits similarities to traditional transition‐metal catalysts. In our study, we computationally‐mapped in‐detail the surface catalytic‐space of h‐BN for methane oxidation. We considered different structures of h‐BN and show that these structures contain numerous sites for O2 binding and therefore various routes for methane oxidation are possible. The activation barriers for methane oxidation via various paths vary from ~83 to ~123 kcal mol−1. To comprehend the differences in activation barriers, we employed geometrical, orbital and distortion/interaction analysis (DIA). Orbital analysis reveals that methane activation over h‐BN in presence of dioxygen follows a standard hydrogen atom transfer mechanism. It is also shown that water plays an intriguing role in reducing the barrier for HCHO and CO formation by acting as a bridge.

chemistry, multidisciplinary
Increased hydroxyl concentration by tungsten oxide modified h-BN promoted catalytic performance in partial oxidation of methane

Meiru Yang,Yan Lv,Jin Wang,Chuanmin Ding,Junwen Wang,Lichao Ma,Kan Zhang,Ping Liu

DOI: https://doi.org/10.1016/j.ijhydene.2022.06.047

IF: 7.2

2022-07-07

International Journal of Hydrogen Energy

Abstract:Hexagonal boron nitride (h-BN) as a layered inorganic nonmetallic material has been widely used. Hydrogen peroxide (H 2 O 2 ) modification can trigger exfoliation and afford abundant B–OH active sites at edge of h-BN, which can enhance methane activation ability. Introducing tungsten oxide (WO 3 ) to h-BN produces a similar effect, because doping WO 3 into h-BN resulted in electron transfer to N, inducing fracture of B–N bond, resulting in N vacancy (triboron center), exposing more B sites and promoting the generation of B–OH. Significantly, the introduction of WO 3 on the modified h-BN dramatically increased the concentration of B–OH compared with the unmodified h-BN, because H 2 O 2 modification weakened B–N bond. By means of XRD, TEM, XPS,EPR, FT-IR, it is proved that the high concentration of B–OH active sites contributed to activating C–H bond, thus methane conversion and CO and H 2 selectivity were significantly improved.

energy & fuels,electrochemistry,chemistry, physical
Methane C(sp3)-H Bond Activation by Water Microbubbles.

Juan Li,Jinheng Xu,Qingyuan Song,Xinxing Zhang,Yu Xia,Richard N. Zare

DOI: https://doi.org/10.1039/d4sc05773b

IF: 8.4

2024-01-01

Chemical Science

Abstract:Microbubble-induced oxidation offers an effective approach for activating the C(sp(3))-H bond of methane under mild conditions, achieving a methane activation rate of up to 6.7% per hour under optimized parameters. In this study, microbubbles provided an extensive gas-liquid interface that promoted the formation of hydroxyl (OH center dot) and hydrogen radicals (H-center dot), which facilitated the activation of methane, leading to the generation of methyl radicals (CH3 center dot). These species further participated in free-radical reactions at the interface, resulting in the production of ethane and formic acid. The microbubble system was optimized by adjusting gas-liquid interaction time, water temperature, and bubble size, with the optimal conditions (150 s of water-gas interaction, 15 degrees C, 50 mu m bubble size) yielding a methane conversion rate of 171.5 ppm h(-1), an ethane production rate of 23.5 ppm h(-1), and a formic acid production rate of 2.3 nM h(-1) during 8 h of continuous operation. The stability and efficiency of this process, confirmed through electron spin resonance, high-resolution mass spectrometry, and gas chromatography, suggest that microbubble-based methane activation offers a scalable and energy-efficient pathway for methane utilization.
Selective Conversion of Carbon Dioxide into Methane with a 98% Yield on an in Situ Formed Ni Nanoparticle Catalyst in Water

Heng Zhong,Guodong Yao,Xin Cui,Peng Yan,Xiaoguang Wang,Fangming Jin

DOI: https://doi.org/10.1016/j.cej.2018.09.155

IF: 15.1

2019-01-01

Chemical Engineering Journal

Abstract:Developing simple and highly efficient technologies for CO2 conversion to chemical fuels is always of great interest. In this work, we report a new and simple method of CO2 conversion into methane in water with an in situ synthesized Ni nanoparticle catalyst, in which the water is used as a hydrogen source and earth-abundant metals (Zn or Fe) are used as re-generable reductants. An excellent 98% yield of methane from either CO2 or HCO3- was obtained at 300 degrees C, and the in situ formed Ni nanoparticle catalyst exhibits not only extraordinary catalytic activity but also stability. Mechanistic studies suggest that the formation of methane from HCO3- or CO2 follows the pathway of HCO3- -> CO2 -> HCOOH -> CH4. This work demonstrates a simple approach for highly efficient conversion of CO2 to methane with earth-abundant materials.
Direct Conversion of Methane to Methanol on Boron Nitride-Supported Copper Single Atoms

Sanmei Wang,Yue Xin,Jinyun Yuan,Liangbing Wang,Wenhua Zhang

DOI: https://doi.org/10.1039/d1nr08466f

IF: 6.7

2022-01-01

Nanoscale

Abstract:Direct conversion of methane to methanol (DMTM) under mild conditions is one of the most attractive and challenging processes in catalysis. By using density functional theory calculations, we systematically investigate the catalytic performance of Cu single atoms supported on O-doped BN in different coordination environments as a DMTM catalyst. Computations demonstrate that Cu coordinated with one O atom and two N atoms on O-doped BN (Cu1/O1N2-BN) exhibited the highest catalytic activity for DMTM at room temperature with quite a low rate-determining step energy barrier of 0.46 eV. The moderate adsorption of *O atoms, selective stabilization of CH3 species, and easy desorption of CH3OH are responsible for the unique activity of Cu1/O1N2-BN for DMTM. In addition, the adsorption free energy of *O atoms produced by the dissociation of O-donor molecules is a suitable descriptor for predicting the catalytic performance of materials and accelerating the discovery of catalysts for DMTM. This work opens new avenues to develop highly efficient catalysts for DMTM.
Methane Conversion over C2N-Supported Fe2 Dimers

Haihong Meng,Bing Han,Fengyu Li,Jingxiang Zhao

DOI: https://doi.org/10.3390/catal10090973

IF: 3.9

2020-08-29

Catalysts

Abstract:Methane is a vast hydrocarbon resource around the globe that has the potential to replace petroleum as a raw material and energy source. Therefore, the catalytic conversion of methane into high value-added chemicals is significantly important for the utilization of this hydrocarbon resource. However, this is a great challenge due to the high-energy input required to overcome the reaction barrier. Herein, a highly active catalytic conversion process of methane on an iron dimer anchored on a two-dimensional (2D) C2N monolayer (Fe2@C2N) is reported. Density functional theory calculations reveal that the superior properties of Fe2@C2N can be attributed to the formation of the Fe-O-Fe intermediate with H2O2 as the O-donor molecule, which facilitates the formation of methyl radicals and promotes the conversion of methane. This finding could pave the way toward highly efficient non-precious metal catalysts for methane oxidation reactions.

chemistry, physical
A high performance catalyst for methane conversion to methanol: graphene supported single atom Co.

Jinyun Yuan,Wenhua Zhang,Xingxing Li,Jinlong Yang

DOI: https://doi.org/10.1039/c7cc08713f

IF: 4.9

2018-01-01

Chemical Communications

Abstract:Employing first principles calculations, we show a two-step reaction mechanism for direct methane oxidation to methanol over a single atom Co-embedded graphene (Gr) catalyst, with N2O as the O-donor molecule. C-H activation is the rate-limiting step. The high reaction activity and selectivity under mild conditions were predicted for this catalyst.
Water enables mild oxidation of methane to methanol on gold single-atom catalysts

Laihao Luo,Jie Luo,Hongliang Li,Fangning Ren,Yifei Zhang,Andong Liu,Wei-Xue Li,Jie Zeng

DOI: https://doi.org/10.1038/s41467-021-21482-z

IF: 16.6

2021-02-22

Nature Communications

Abstract:Abstract As a 100% atom-economy process, direct oxidation of methane into methanol remains as a grand challenge due to the dilemma between activation of methane and over-oxidation of methanol. Here, we report that water enabled mild oxidation of methane into methanol with >99% selectivity over Au single atoms on black phosphorus (Au 1 /BP) nanosheets under light irradiation. The mass activity of Au 1 /BP nanosheets reached 113.5 μmol g catal −1 in water pressured with 33 bar of mixed gas (CH 4 :O 2 = 10:1) at 90 °C under light irradiation (1.2 W), while the activation energy was 43.4 kJ mol −1 . Mechanistic studies revealed that water assisted the activation of O 2 to generate reactive hydroxyl groups and •OH radicals under light irradiation. Hydroxyl groups reacted with methane at Au single atoms to form water and CH 3 * species, followed by oxidation of CH 3 * via •OH radicals into methanol. Considering the recycling of water during the whole process, we can also regard water as a catalyst.

multidisciplinary sciences
Direct methane activation by atomically thin platinum nanolayers on two-dimensional metal carbides

Zhe Li,Yang Xiao,Prabudhya Roy Chowdhury,Zhenwei Wu,Tao Ma,Johnny Zhu Chen,Gang Wan,Tae-Hoon Kim,Dapeng Jing,Peilei He,Pratik J. Potdar,Lin Zhou,Zhenhua Zeng,Xiulin Ruan,Jeffrey T. Miller,Jeffrey P. Greeley,Yue Wu,Arvind Varma

DOI: https://doi.org/10.1038/s41929-021-00686-y

IF: 37.8

2021-10-01

Nature Catalysis

Abstract:Efficient and direct conversion of methane to value-added products has been a long-term challenge in shale gas applications. Here, we show that atomically thin nanolayers of Pt with a single or double atomic layer thickness, supported on a two-dimensional molybdenum titanium carbide (MXene), catalyse non-oxidative coupling of methane to ethane/ethylene (C2). Kinetic and theoretical studies, combined with in-situ spectroscopic and microscopic characterizations, demonstrate that Pt nanolayers anchored at the hexagonal close-packed sites of the MXene support can activate the first C–H bond of methane to form methyl radicals that favour desorption over further dehydrogenation and thus suppress coke deposition. At 750 °C and 7% methane conversion, the catalyst runs for 72 hours of continuous operation without deactivation and exhibits >98% selectivity towards C2 products, with a turnover frequency of 0.2–0.6 s−1. Our findings provide insights into the design of highly active and stable catalysts for methane activation and create a platform for developing atomically thin supported metal catalysts.

chemistry, physical
Methane C(sp 3 )–H bond activation by water microbubbles

Juan Li,Jinheng Xu,Qingyuan Song,Xinxing Zhang,Yu Xia,Richard N. Zare

DOI: https://doi.org/10.1039/d4sc05773b

IF: 8.4

2024-10-02

Chemical Science

Abstract:Microbubble-induced oxidation offers an effective approach for activating the C(sp 3 )–H bond of methane under mild conditions, achieving a methane activation rate of up to 6.7% per hour under optimized parameters. In this study, microbubbles provided an extensive gas–liquid interface that promoted the formation of hydroxyl (OH ̇) and hydrogen radicals (H ̇), which facilitated the activation of methane, leading to the generation of methyl radicals (CH 3 ̇). These species further participated in free-radical reactions at the interface, resulting in the production of ethane and formic acid. The microbubble system was optimized by adjusting gas–liquid interaction time, water temperature, and bubble size, with the optimal conditions (150 s of water–gas interaction, 15 °C, 50 μm bubble size) yielding a methane conversion rate of 171.5 ppm h −1 , an ethane production rate of 23.5 ppm h −1 , and a formic acid production rate of 2.3 nM h −1 during 8 h of continuous operation. The stability and efficiency of this process, confirmed through electron spin resonance, high-resolution mass spectrometry, and gas chromatography, suggest that microbubble-based methane activation offers a scalable and energy-efficient pathway for methane utilization.

chemistry, multidisciplinary
Methane activation on dual-atom catalysts supported on graphene

Chongchong Wu,Weijie Yang,Jacky Jingyi Wang,Hao Li,Ian D Gates,Ian D. Gates

DOI: https://doi.org/10.1039/d1cc05701d

IF: 4.9

2021-01-01

Chemical Communications

Abstract:Dual-atom Fe catalysts supported by three nitrogen doped graphene (Fe–TM/GP, where TM = Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are explored for methane adsorption and activation.

chemistry, multidisciplinary
Selective Monoborylation of Methane by a Mono Bipyridyl‐Nickel(II) Hydride Catalyst

Rahul Kalita,Manav Chauhan,Poorvi Gupta,Wahida Begum,Kuntal Manna

DOI: https://doi.org/10.1002/anie.202413402

2024-10-30

Angewandte Chemie International Edition

Abstract:We report the development of an earth-abundant metal catalyst for methane C‒H borylation. The post-synthetic metalation of bipyridine-functionalized zirconium metal−organic framework (MOF) with NiBr2, followed by treatment of NaEt3BH affords MOF-supported monomeric bipyridyl-nickel(II) dihydride species via active site isolation. The heterogeneous and recyclable nickel catalyst selectively borylates methane at 200 oC using pinacolborane (HBpin) to afford CH3Bpin in 61% yield with a turnover number (TON) up to 1388. The confinement of the active NiH2-species within the uniformly porous MOF allows selective monoborylation of methane via shape-selective catalysis by preventing the formation of sterically encumbered overborylated products. Unlike MOF-Ni catalyst, its homogeneous control is almost inactive in methane borylation due to its intermolecular decomposition. Our mechanistic investigation, including spectroscopic, kinetic, and control experiments, as well as DFT calculations, revealed that stabilizing mononuclear bipyridyl-nickel dihydride and diboryl species by MOF is crucial for achieving efficient methane borylation via turnover-limiting σ-bond metathesis. This work shows promise in designing MOF-based abundant metal catalysts for the chemoselective functionalization of methane and other inert molecules into valuable chemicals.

chemistry, multidisciplinary
H2O in situ induced active site structure dynamics for efficient methane direct oxidation to methanol over Fe-BEA zeolite

Ning Liu,Yan Li,Chengna Dai,Ruinian Xu,Gangqiang Yu,Ning Wang,Biaohua Chen

DOI: https://doi.org/10.1016/j.jcat.2022.09.001

IF: 7.3

2022-10-01

Journal of Catalysis

Abstract:The H2O has recently aroused great attentions due to its special promotion effect during direct oxidation of methane to methanol (DMTM). Herein, the H2O is for the first time unravelled working as one type of active site tuning agent that can in situ transform the active site from less active [Fe-O-Fe]2+ into highly active [FeOH]2+-O-[FeOH]2+ (assisted by N2O) over the best performing Fe-BEA-1 % during continuous N2O-DMTM (T = 250 °C). Specifically, the generated radicals of CH3– and OH− prefer to react with the [OH]- groups of [FeOH]2+-O-[FeOH]2+ to respectively produce CH3OH and regenerate H2O following a favorable energy route (<0.6 eV), eventually leading to pronouncedly boosted CH3OH productivity (from 25.0 to 227.0 μmol g−1h−1), selectivity (from 9.4 to 72.9 %) and long-term reaction stability. The present work sheds a new light on the active site structure directing effect of H2O, which would substantially favor other highly efficient catalyst designs.

chemistry, physical,engineering, chemical

Methane Activation over a Boron Nitride Catalyst Driven by in Situ Formation of Molecular Water

Methane Activation by the Heteronuclear Cluster [TiAlO<sub>4</sub>]<SUP>+</SUP>: Direct Hydrogen Abstraction by a Nonradical Oxygen

A Novel Mechanism of Activation of Methane over Metal-Free Hexagonal Boron Nitride Catalyst

Methane activation by a borenium complex

Mechanistic Insights into Radical-Induced Selective Oxidation of Methane over Nonmetallic Boron Nitride Catalysts

Screening Performance of Methane Activation over Atomically Dispersed Metal Catalysts on Defective Boron Nitride Monolayers: A Density Functional Theory Study

Direct conversion of methane to formaldehyde and CO on B2O3 catalysts

Activation and Conversion of Methane to Syngas over ZrO2/Cu(111) Catalysts near Room Temperature

Mapping the Catalytic‐Space for the Reactivity of Metal‐free Boron Nitride with O2 for H2O‐Mediated Conversion of Methane to HCHO and CO

Increased hydroxyl concentration by tungsten oxide modified h-BN promoted catalytic performance in partial oxidation of methane

Methane C(sp3)-H Bond Activation by Water Microbubbles.

Selective Conversion of Carbon Dioxide into Methane with a 98% Yield on an in Situ Formed Ni Nanoparticle Catalyst in Water

Direct Conversion of Methane to Methanol on Boron Nitride-Supported Copper Single Atoms

Methane Conversion over C2N-Supported Fe2 Dimers

A high performance catalyst for methane conversion to methanol: graphene supported single atom Co.

Water enables mild oxidation of methane to methanol on gold single-atom catalysts

Direct methane activation by atomically thin platinum nanolayers on two-dimensional metal carbides

Methane C(sp 3 )–H bond activation by water microbubbles

Methane activation on dual-atom catalysts supported on graphene

Selective Monoborylation of Methane by a Mono Bipyridyl‐Nickel(II) Hydride Catalyst

H2O in situ induced active site structure dynamics for efficient methane direct oxidation to methanol over Fe-BEA zeolite