Abstract:One of the key challenges toward high-power Li-ion batteries is to develop cheap, easy-to-prepare materials that combine high volumetric and gravimetric energy density with high power densities and a long cycle life. This requires electrode materials with large tap densities, which generally compromises the charge transport and hence the power density. Here densely packed Li4Ti5O12 (LTO) submicrospheres are prepared via a simple and easily up-scalable self-assembly process, resulting in very high tap densities (1.2 g.cm(-2)) and displaying exceptionally stable long-term high rate cyclic performance. The specific capacities at a (dis) charge rate of 10 and 20 C reach 148.6 and 130.1 mAh g(-1), respectively. Moreover, the capacity retention ratio is 97.3% after 500 cycles at 10 C in a half cell, and no obvious capacity reduction is found even after 8000 cycles at 30 C in a full LiFePO4/LTO battery. The excellent performance is explained by the abundant presence of grain boundaries between the nanocrystallites in the submicron spheres creating a 3D interconnected network, which allows very fast Li-ion and electron transport as indicated by the unusually large Li-ion diffusion coefficients and electronic conductivity at (6.2 x 10(-12) cm(2) s(-1) at 52% SOC and 3.8 X 10(-6) S cm(-1), respectively). This work demonstrates that, unlike in porous and nanosheet LTO structures with a high carbon content, exceptionally high rate charge transport can be combined with a large tap density and hence a large volumetric energy density, with the additional advantage of a much longer cycle life. More generally, the present results provide a promising strategy toward electrode materials combining high rate performances with high volumetric energy densities and long-term cyclic stability as required for the application in electric vehicles and tools.

Interface Charges Boosted Ultrafast Lithiation in Li4Ti5O12 Revealed by In-Situ Electron Holography

Interfacial Lithiation Induced Leapfrog Phase Transformation in Carbon Coated Se Cathode Observed by In-Situ TEM

Multi-layering of carbon conductivity enhancers for boosting rapid recharging performance of high mass loading lithium ion battery electrodes

Combining Fast Li-Ion Battery Cycling with Large Volumetric Energy Density: Grain Boundary Induced High Electronic and Ionic Conductivity in Li4Ti5O12 Spheres of Densely Packed Nanocrystallites

Regulating Electrode/electrolyte Interfacial Chemistry Enables 4.6 V Ultra-Stable Fast Charging of Commercial LiCoO2

Large Polarization of Li4Ti5O12 Lithiated to 0 V at Large Charge/Discharge Rates.

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor

Ti 3+ Self-Doped Li 4 Ti 5 O 12 Anchored on N-Doped Carbon Nanofiber Arrays for Ultrafast Lithium-Ion Storage.

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

Janus Solid-Liquid Interface Enabling Ultrahigh Charging And Discharging Rate For Advanced Lithium-Ion Batteries

Nonequilibrium fast-lithiation of Li 4 Ti 5 O 12 thin film anode for LIBs

Enhancing the Kinetic Lithium Insertion in Li4Ti5O12 by Introducing Anatase TiO2

Synchronous Manipulation of Ion and Electron Transfer in Wadsley–Roth Phase Ti‐Nb Oxides for Fast‐Charging Lithium‐Ion Batteries

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2

Ultrathin [110]‐confined Li4Ti5O12 Nanoflakes for High Rate Lithium Storage

Enhancing Ultrafast Lithium Ion Storage of Li4Ti5O12 by Tailored TiC/C Core/Shell Skeleton Plus Nitrogen Doping

Stable Heteroepitaxial Interface of Li-rich Layered Oxide Cathodes with Enhanced Lithium Storage

Kinetic pathways of ionic transport in fast-charging lithium titanate

Abundant grain boundaries activate highly efficient lithium ion transportation in high rate Li4Ti5O12 compact microspheres

Fast Charge-Transport Interface on Primary Particles Boosts High-Rate Performance of Li-Rich Mn-Based Cathode Materials.

Ion/Electron Co-Conductive Triple-Phase Interface Enabling Fast Redox Reaction Kinetics in Lithium-Sulfur Batteries