Abstract:A zirconium substitution strategy is proposed to enhance the structural stability of the O3‐type NaNi1/3Fe1/3Mn1/3–xZrxO2 cathode materials for sodium‐ion batteries. The increase of zirconium content to replace manganese is beneficial to enlarge the sodium‐ion diffusion layer and to reduce the slab thickness of the TMO6 octahedron, which significantly improves the cycling performance and rate capability of the cathode materials. We successfully synthesized a series of O3‐type NaNi1/3Fe1/3Mn1/3−xZrxO2 (x = 0, 0.01, 0.02, 0.04) cathode materials by the solid‐state reaction method. Energy dispersion spectroscopy, X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy results confirmed the successful incorporation of Zr elements into the lattice to substitute Mn. Due to the introduction of Zr4+, the crystal structure modulation of O3‐NaNi1/3Fe1/3Mn1/3O2 has been realized. By increasing the Zr4+ content, the width of the sodium diffusion layer expands, thereby facilitating the diffusion of sodium ions. Consequently, the material exhibits a remarkable enhancement in high‐rate capability. At the same time, increasing the Zr4+ content results in a notable decrease in both the average bond length of TM−O and the thickness of the TMO6 octahedron in the transition metal layer, resulting in a significant improvement in the cycling performance and structural stability of the cathode material. Additionally, the in‐situ XRD results demonstrate that the optimized cathode composition of O3‐NaNi1/3Fe1/3Mn1/3–0.02Zr0.02O2 (NFMZ2) undergoes a reversible phase transition of O3 → O3 + P3 → P3 → O3 + P3 → O3 during the charge–discharge process.

Reversible Multi-Electron Transfer of Cr2.8+/Cr4.4+in O3-Type Layered Na0.66Fe1/3Cr1/3Ti1/3O2for Sodium-Ion Batteries

Reversible Multi-Electron Transfer of Cr2.8+/Cr4.4+ in O3-Type Layered Na0.66Fe1/3Cr1/3Ti1/3O2 for Sodium-Ion Batteries

Sodium-deficient O3-type Na0.83Cr1/3Fe1/3Mn1/6Ti1/6O2 As a New Cathode Material for Na-ion Batteries

Suppressing the chromium disproportionation reaction in O3-type layered cathode materials for high capacity sodium-ion batteries

Layer-structured Ti Doped O3-Na1−xCr1−xTixO2(x=0, 0.03, 0.05) with Excellent Electrochemical Performance As Cathode Materials for Sodium Ion Batteries

Sodium Storage Property and Mechanism of NaCr1/4Fe1/4Ni1/4Ti1/4O2 Cathode at Various Cut-off Voltages

A Layer-Structured High Entropy Oxide with Highly Reversible Fe3+/Fe4+ Redox As Advanced Cathode Material for Sodium Ion Batteries

A High-Performance Layered Cr-Based Cathode for Sodium-Ion Batteries

O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries

Revealing the anionic redox chemistry in O3-type layered oxide cathode for sodium-ion batteries

O3-type NaNi1/3Fe1/3Mn1/3O2 layered cathode for Na-ion batteries: Structural evolution and redox mechanism upon Na (de) intercalation

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

Design of Cu-Substituted O3-Type NaFe0.5 Mn0.5 O2 Cathode Materials for Sodium-Ion Batteries

Facilitating reversible transition metal migration and expediting ion diffusivity via oxygen vacancy for high performance O3-type sodium layered oxide cathodes

Probing Reversible Multielectron Transfer and Structure Evolution of Li1.2Cr0.4Mn0.4O2 Cathode Material for Li-Ion Batteries in a Voltage Range of 1.0–4.8 V

Toward high stability of O3‐type NaNi1/3Fe1/3Mn1/3O2 cathode material with zirconium substitution for advanced sodium‐ion batteries

Multiprincipal Component P2-Na0.6(Ti0.2Mn0.2Co0.2Ni0.2Ru0.2)O2 As a High-Rate Cathode for Sodium-Ion Batteries.

A Novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 Cathode for Na-ion Batteries

Tuning anionic redox activity to boost high-performance sodium-storage in low-cost Na0.67Fe0.5Mn0.5O2 cathode

Carbon-coated single crystal O3-NaFeO2 nanoflakes prepared via topochemical reaction for sodium-ion batteries

Effect of Ti doping on the structural and electrochemical performance of O3-type Na(Ni0.3Fe0.2Mn0.5)1-xTixO2 cathode materials for sodium-ion batteries