Abstract:Currently, rechargeable batteries with the lithium–sulfur (Li–S) chemistry has attracted great interest as one of the most promising candidates for next generation electrochemical energy storage systems. Research into these high energy density devices is critical to the development of thinner, lighter, and lower cost battery systems. One of the biggest obstacles for practical applications of Li-S batteries is caused by the soluble nature of the highly ordered lithium polysulfides (Li 2 S n ) in the organic electrolytes and induce a so-called "shuttle effect". A solid-state electrolyte (SPEs) could be a valid alternative in terms of reducing the polysulfides dissolution and shuttle, as well as to protect the lithium metal anode and to minimize dendrite formation, which is beneficial for improving the safety and cycle life of Li−S batteries. SPEs are typically dual-ion conductor systems both cations and anions are mobile and cause a concentration polarization leading to poor performances of batteries. Recently, single lithium-ion conducting solid polymer electrolytes (SLIC-SPEs) have been proposed for polymer electrolytes, where anions are covalently bonded to the polymer, inorganic backbone, or immobilized by anion acceptors and only the Li + cation will contribute to a permanent flow of charge. They have advantages over conventional dual-ion conducting SPEs such as unity transference number, absence of harmful effect of anion polarization, extremely low rate of Li dendrite growth and immobilization of the lithium polysulfides in the lithium-sulfur (Li-S) batteries. Polymer electrolytes based on ionomers (e.g., Nafion) with easily ionizable groups (e.g., sulfonic groups covalently bonded to the polymer side-chains, −CF 2 SO 3 − ) are promising thanks to the high concentration of weakly coordinating anions (counterions). In this work, lithiated Nafion and Nafion-nanocomposites membranes based on Nanoscale Ionic Materials (NIMs) were synthesized, and their ionic conductivity and lithium transference number were investigated in common nonaqueous organic solvents (EC/PC and Glymes). A thorough and systematic study of the lithium-ion transport was conducted by p 1 H and 7 Li pulsed field gradient (PFG) NMR spectroscopy and electrochemical impedance spectroscopy (EIS), while the mechanical properties of the film electrolytes have been tested by dynamic mechanical analysis (DMA) in a wide temperature range. The electrochemical studies have been conducted both in Li/Li symmetric cell and in secondary Li-S cells. The preliminary results are very interesting, showing ionic conductivities of the order of 5 × 10 -4 S/ cm at 25°C satisfactory properties in terms of stability window and stability of the lithium stripping. The lithium transport number is very close to unity thus confirming the complete immobilization of the negative charge carriers.

Lithiated Nafion As Polymer Electrolyte for Solid-State Lithium Sulfur Batteries Using Carbon-Sulfur Composite Cathode

A Novel Laminated Separator with Multi Functions for High-Rate Dischargeable Lithium–sulfur Batteries

Nafion-Based Quasi-Solid-State Polymer Electrolyte for Lithium-Sulfur Batteries

A Self-Supporting Solid Electrolyte Membrane with Fibrous Network Structure for Solid State Lithium Metal Batteries

Nanoscale Ionic Materials for Nafion Based Nanocomposites Membranes As Single Lithium-Ion Conducting Polymer Electrolytes for Lithium Sulfur Batteries

Highly conductive composite cathode prepared by dry process using Nafion-Li ionomer for sulfide-based all-solid-state lithium batteries

Lithium Nafion–Modified Li 6.05 Ga 0.25 La 3 Zr 2 O 11.8 F 0.2 Trilayer Hybrid Solid Electrolyte for High-Voltage Cathodes in All-Solid-State Lithium-Metal Batteries

Incorporating the Nanoscale Encapsulation Concept from Liquid Electrolytes into Solid-State Lithium-Sulfur Batteries.

A Solid Electrolyte Based on Sodium-Doped Li4-xNaxTi5O12 with PVDF for Solid State Lithium Metal Battery.

In-situ Fabricated Succinonitrile-Based Composite Electrolyte for High-Performance and Safe Solid-State Lithium Batteries

Dual Interface Compatibility Enabled Via Composite Solid Electrolyte with High Transference Number for Long-Life All-Solid-State Lithium Metal Batteries

Solid-State Rigid Polymer Composite Electrolytes with In-Situ Formed Nano-Crystalline Lithium Ion Pathways for Lithium-Metal Batteries.

Converting Nafion into Li+‐Conductive Nanoporous Materials

Nafion Coated Sulfur–carbon Electrode for High Performance Lithium–sulfur Batteries

Stable performance of an all-solid-state Li metal cell coupled with a high-voltage NCA cathode and ultra-high lithium content poly(ionic liquid)s-based polymer electrolyte

Dendrite-free solid-state lithium batteries enabled by fluorine doped Li7La3Zr2O12 composite electrolyte and LiAlF4 Interphase

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Quasi-Solid-State Lithium-Sulfur Batteries Assembled by Composite Polymer Electrolyte and Nitrogen Doped Porous Carbon Fiber Composite Cathode

A Solid‐State Battery Cathode with a Polymer Composite Electrolyte and Low Tortuosity Microstructure by Directional Freezing and Polymerization

Intercalated Electrolyte with High Transference Number for Dendrite‐Free Solid‐State Lithium Batteries

Built-in superionic conductive phases enabling dendrite-free, long lifespan and high specific capacity composite lithium for stable solid-state lithium batteries