Abstract:With the rapid progress of science and technology, many applications of hard and brittle materials require advanced and suitable machining-techniques. One technique in particular, ultrasonic vibration-assisted polishing (UVAP), has been studied intensively by researchers worldwide. These studies indicate that UVAP has the capability to improve the surface quality as well as the machining efficiency. However, few studies focus on the deterministic material-removal of UVAP. The difference between generated and theoretical surface profiles determines the surface accuracy. Therefore, this paper focuses on predicting the generated local surface profile and providing a theoretical basis to reduce this error by controlling the polishing parameters. In addition to the axial ultrasonic vibration of polishing tool, ultrasonic atomization was adopted to provide uniformly distributed polishing slurry. To ensure sufficient surface-accuracy, it is necessary to predict the generated surface profile for a fixed spot as a basis research. This means, to enable accurate predictions the following improvements are realized: (i) A novel model for the elastic spherical contact-deformation of the polishing tool is used to calculate both the polishing force and contact radius. It takes into account the nonlinear elasticity of the polishing tool and the lateral extension of the contact area, which makes it more consistent with the actual deformation. (ii) A novel model for the material-removal distribution function for UVAP is proposed, based on the Preston equation. It considers the periodic changes of polishing force and contact radius caused by ultrasonic vibration. (iii) A series of fixed-spot polishing experiments on BK7 glass are carried out to verify the proposed models. The results show that the Preston coefficient is affected by axial ultrasonic amplitude, and large ultrasonic amplitude improves the polishing ability. In addition, the generated local surface profile, the maximum contact radius, as well as the material-removal depth and material-removal rate (MRR) can be predicted well. The new models not only provide a possibility to realize deterministic material removal but also enables in-depth-understanding of UVAP. It also represents a basic theoretical foundation for future, flat or free-form surface-polishing.

Surface Roughness Prediction Model in Ultrasonic Vibration Assisted Grinding of BK7 Optical Glass

An Intelligent Prediction of Surface Roughness on Precision Grinding

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing

Relationship Between Subsurface Damage and Surface Roughness of Glass BK7 in Rotary Ultrasonic Machining and Conventional Grinding Processes

Modeling and prediction of generated local surface profile for ultrasonic vibration-assisted polishing of optical glass BK7

Study on machining BK7 optical glass by ultrasonic vibration-assisted polishing considering the micro-contact state of the abrasive particles with the workpiece

Relationship Between Surface Roughness and Subsurface Crack Depth During Grinding of Optical Glass BK7

Predictive modeling and experimental study of polishing force for ultrasonic vibration-assisted polishing of K9 optical glass

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Estimation of the Surface Roughness of K9 Optical Glass in Precision Grinding Using the Brittle Material Removal Fraction Based on an Improved Image Processing Algorithm

Prediction of Grinding Induced Subsurface Damage of Optical Materials

Roughness model of an optical surface in ultrasonic assisted diamond turning

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Model for Predicting the Micro-Grinding Force of K9 Glass Based on Material Removal Mechanisms

Prediction of undeformed chip thickness distribution and surface roughness in ultrasonic vibration grinding of inner hole of bearings

Predicting Surface Roughness in Turning Complex-Structured Workpieces Using Vibration-Signal-Based Gaussian Process Regression

Modelling and experimental analysis of surface roughness in spherical grinding

Study on the material removal mechanism and the exit breakage of ultrasonic vibration-assisted grinding for microcrystalline glass

Surface profile prediction modeling of spiral toolpath for axial ultrasonic vibration-assisted polishing

A Model for Prediction of Subsurface Damage in Rotary Ultrasonic Face Milling of Optical K9 Glass