Abstract:This paper presented a fundamental investigation of the surface formation mechanisms involved in rotary ultrasonic machining (RUM) of glass BK7 process. Comparative observations of the scratches, generated in the scratching tests with and without ultrasonic, were performed using optical microscopy, white-light interferometer, and scanning electron microscopy (SEM). Giving consideration to the scratch morphologies and the abrasive process kinematics, the mechanisms of surface formation provoked by the ultrasonic superposition were investigated. Additionally, the formal machining tests with and without ultrasonic were also conducted to validate these surface formation mechanisms. As a result, a nondimensional parameter K was proposed to quantitatively describe the ultrasonic effects of the abrasives as well as to correlate these effects with the machining conditions. Due to the periodic variation in the effective work angle of the abrasive, the material accumulated slightly at the RUM groove entrance, whereas serious material accumulation appeared at the exit. The stress imbalance on the specimen surface induced by the dramatic fluctuation of the abrasive inertia load caused plenty of tortuous cracks in 0.2 mu m-sized length emerge on the RUM grooves generated in the ductile material removal stage. A novel theoretical model of the surface formation mechanisms involved in formal RUM process was established by incorporating the ultrasonic effects, such as the lower dynamic fracture toughness of material, cyclical variation in the effective work angle of the abrasive, and the larger abrasive inertia force. Experimental results obtained in formal machining tests revealed that superimposing an ultrasonic vibration could distinctly reduce the cutting force of the diamond tool without seriously worsening the surface quality of the specimens. (C) 2013 Elsevier Inc. All rights reserved.

A Model for Prediction of Subsurface Damage in Rotary Ultrasonic Face Milling of Optical K9 Glass

Relationship Between Subsurface Damage and Surface Roughness of Glass BK7 in Rotary Ultrasonic Machining and Conventional Grinding Processes

An Intelligent Prediction of Surface Roughness on Precision Grinding

Prediction of Grinding Induced Subsurface Damage of Optical Materials

Investigation into the Rotary Ultrasonic Face Milling of K9 Glass with Mechanism Study of Material Removal

Prediction and Verification Analysis of Grinding Force in the Single Grain Grinding Process of Fused Silica Glass

Theoretical and Experimental Research on the Features of Cutting Force in Rotary Ultrasonic Face Milling of K9 Glass

Experimental Investigation of Rotary Ultrasonic Face Milling of K9 Glass

Modeling the Dependency of Edge Chipping Size on the Material Properties and Cutting Force for Rotary Ultrasonic Drilling of Brittle Materials

Subsurface Damage Depth and Distribution in Rotary Ultrasonic Machining and Conventional Grinding of Glass Bk7

Assessment of sub-micron subsurface damage in glass

Experimental Investigation on Surface/Subsurface Damage in Rotary Ultrasonic Machining of Glass BK7

Analytical prediction for depth of subsurface damage in silicon wafer due to self-rotating grinding process

Theoretical Model and Digital Extraction of Subsurface Damage in Ground Fused Silica

A cutting force prediction model for rotary ultrasonic side grinding of CFRP composites considering coexistence of brittleness and ductility

Mathematical Model for Cutting Force in Rotary Ultrasonic Face Milling of Brittle Materials

Influences of Vibration on Surface Formation in Rotary Ultrasonic Machining of Glass Bk7

Roughness model of an optical surface in ultrasonic assisted diamond turning

EXPERIMENTAL INVESTIGATIONS ON SUBSURFACE DAMAGE IN ROTARY ULTRASONIC MACHINING OF GLASSBK7

Effects Of Process Parameters On The Machining Quality In Rotary Ultrasonic Face Milling Of Bk7 Glass

Predictive modeling and experimental study of polishing force for ultrasonic vibration-assisted polishing of K9 optical glass