Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Degradation of KNN-Based Lead-Free Piezoelectric Material under Gamma Irradiation

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

A high temperature stable piezoelectric strain of KNN-based ceramics

Effects of the post-annealing reductive-atmosphere-sintered (K0.48Na0.52)NbO3 lead-free piezoceramics

BaZrO3-modified (K,Na)NbO3-based lead-free piezoceramics: Enhanced electrical properties and high fatigue resistance

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics

Niobate-based lead-free piezoceramics: a diffused phase transition boundary leading to temperature-insensitive high piezoelectric voltage coefficients

High And Temperature-Insensitive Piezoelectric Strain In Alkali Niobate Lead-Free Perovskite

The structural origin of enhanced piezoelectric performance and stability in lead free ceramics

Piezoelectric properties of (K0.5Na0.5)NbO3-BaTiO3 lead-free ceramics prepared by spark plasma sintering

Temperature Dependent Fracture Toughness of KNN-Based Lead-Free Piezoelectric Ceramics

Insight into the evolutions of microstructure and performance in bismuth ferrite modified potassium sodium niobate lead-free ceramics

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Nanodomain Engineered (K, Na)NbO3 Lead‐Free Piezoceramics: Enhanced Thermal and Cycling Reliabilities

Composition-insensitive enhanced piezoelectric properties in SrZrO3 modified (K, Na)NbO3-based lead-free ceramics

Deformation and bending strength of high‐performance lead‐free piezoceramics

Enhanced piezoelectric properties in 0.96(K0.48Na0.52)(Nb1−xTax)O3–0.04(Bi0.5Ag0.5)ZrO3 lead-free ceramics

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere