Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Temperature Dependent Fracture Toughness of KNN-Based Lead-Free Piezoelectric Ceramics

Fracture behavior in electrically poled alkaline bismuth- and potassium- based lead-free piezoceramics using Vickers indentation

Deformation and bending strength of high‐performance lead‐free piezoceramics

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

(Bi0.5na0.5)(zr0.97w0.01fe0.02)o3 Doping Effects on KNN‐based Lead‐free Ceramics Prepared Via Two‐step Sintering Technique

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Mitigation Of Thermal And Fatigue Behavior In K0.5na0.5nbo3-Based Lead Free Piezoceramics

A high temperature stable piezoelectric strain of KNN-based ceramics

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Comprehensive Investigation of Elastic and Electrical Properties of Li/Ta-modified (k,na)nbo3 Lead-Free Piezoceramics

Temperature‐ and stress‐dependent electromechanical properties of phase boundary engineered KNN‐based piezoceramics

Niobate-based lead-free piezoceramics: a diffused phase transition boundary leading to temperature-insensitive high piezoelectric voltage coefficients

Characterization of Lead Free (k0.5na0.5)nbo3–lisbo3 Piezoceramic

High Temperature-Insensitive Electrostrain Obtained in (K, Na)NbO3-Based Lead-Free Piezoceramics

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics

Temperature- and Stress-Dependent Electromechanical Properties of Phase Boundary Engineered (K,na)nbo3-Based Lead-Free Piezoceramics

Intergranular Stress Induced Phase Transition in Cazro3 Modified Knn-Based Lead-Free Piezoelectrics

Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics

Full Characterization for Material Constants of a Promising KNN-based Lead-Free Piezoelectric Ceramic

Enhanced Piezoelectric Properties and Temperature Stability in KNN-based Textured Ceramics