Abstract:This paper deals with the behavior of roller compacted concrete (RCC) cores in uniaxial tension cored from a practical RCC dam. Properties included are tensile strength, peak strain, modulus of elasticity, fracture energy, brittleness, complete stress-deformation curve, and stress-crack width curve both for the RCC matrix and the interface. Two categories of compressive strengths of RCC, 15 and 20 MPa, respectively, were tested in order to investigate the effect of RCC compressive strength on their behaviors. Two categories of specimen sizes of RCC, 150 X 300 mm and 250 X 500 mm cylindrical specimens, were also tested in order to investigate the effect of specimen size on their behaviors. The complete stress-deformation curves for RCC specimens were achieved by using a servohydraulic closed-loop testing system and four extensometers, of which the extensometer indicating maximum deformation is employed as feedback signal. Based on the stress-deformation curves, their stress-crack width curves were also obtained and theoretically modeled. The present results support the following conclusions. The uniaxial tensile strength of the RCC matrix is related to both the square root of its nominal compressive strength and the ratio of the maximum size of aggregate to the characteristic dimension of the specimen, but the uniaxial tensile strength of the interface is related only to the later. The modulus of elasticity both for the RCC matrix and for the interface are related to the square root of their nominal compressive strength and the ratio of the maximum size of the aggregate to the characteristic dimension of the specimen. The ultimate crack width of the RCC matrix is governed by the maximum size of the aggregate, but the ultimate crack width of the RCC interface is governed by the ratio of the maximum size of aggregate to the characteristic dimension of the specimen. The fracture energy of the RCC matrix is related to the square root of its nominal compressive strength and the ratio of the maximum size of the aggregate to the characteristic dimension of the specimen, whereas the fracture energy of the RCC interface is related to the square root of its nominal compressive strength and the maximum size of aggregate. The characteristic length of the RCC matrix and interface is related to both the square root of their nominal compressive strength and the ratio of the maximum size of the aggregate to the characteristic dimension of the specimen.

Interlayer Shear Strength of Roller Compacted Concrete (RCC) with Various Interlayer Treatments

Experimental Study of RCC Interlayer Permeability Coefficient

Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete

Experimental Study of Effects of Factors on RCC Setting Times

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Experimental investigation on the properties of the interface between RCC layers subjected to early-age frost damage

Effect of delayed placement of layers on permeability and durability of roller-compacted concrete containing fly ash

Interface shear between SCC and concrete considering different influence parameters

Study on Osmotic Erosion Characteristics of Roller Compacted Concrete

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Mechanical Behavior of Stud Shear Connectors Embedded in Hfrc

Fracture and Tension Properties of Roller Compacted Concrete Cores in Uniaxial Tension

Experimental Study and Failure Criterion Analysis on Combined Compression-Shear Performance of Self-Compacting Concrete

Experimental Investigation on Shear Behavior of the Interface between Early-Strength Self-Compacting Shrinkage-Compensating High-Performance Concrete and Ordinary Concrete Substrate

The Interface Behavior of Rock, Conventional Vibrated and Roller Compacted Concrete

Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar

Effects of Freeze-Thaw Cycles on Interfacial Shear Transfer Characteristics in Section Steel Reinforced Concrete Composite Structures with Stud Connectors

Enhancing the interfacial bond performance of engineered cementitious composites and concrete

Study on the Impact of the Change of Interlayer Elastic Modulus on the Interlayer Stresses of RCC Dam

Shear Behaviour of RC Beams Strengthened using CFRP Grid-ECC/PMM Matrix Composites: An Experimental and Numerical Investigation

Interfacial shear behavior between UHPFRC layers and normal concrete substrate for shear-strengthened squat RC shear walls under cyclic loading