Abstract:Metastable (Ti,Al)N thin films with face-centered cubic (fcc) structure are widely applied to protect tools and components used in the machining industry for their high hardness and exceptional thermal stability. Alloying is a simple but powerful strategy to further improve the performance of (Ti,Al)N thin films. Here, the combination of experiments and ab initio calculations allowed us to further improve the mechanical properties, thermal stability, and oxidation resistance of arc-evaporated (Ti,Al)N films through the addition of Nb and Ta. The developed Ti 0.40 Al 0.53 Nb 0.07 N, Ti 0.34 Al 0.52 Nb 0.14 N, Ti 0.40 Al 0.53 Ta 0.07 N, and Ti 0.34 Al 0.50 Ta 0.16 N thin films show a single-phase fcc structure like Ti 0.46 Al 0.54 N. While the hardness ( H ) of as-deposited (Ti,Al,Nb)N thin films is similar to that of Ti 0.46 Al 0.54 N (30.1 ± 0.4 GPa), it increases to 33.2 ± 0.7 and 34.1 ± 1.1 GPa by alloying with 7 and 16 at.% Ta (metal fraction), respectively. Both alloying elements allow to retard the spinodal decomposition of (Ti,Al)N, as suggested by X-ray diffraction of vacuum-annealed samples. The (Ti,Al)N and (Ti,Al,Nb)N samples exhibit the onset of wurtzite (w-) AlN formation at ~1050 °C, which is postponed to ~1200 °C for the (Ti,Al,Ta)N thin films. Ab initio calculations suggest that age hardening of (Ti,Al)N is improved by Nb and Ta, with Nb being more effective than Ta. This is verified by experiments showing that Ti 0.40 Al 0.53 Nb 0.07 N (Ti 0.34 Al 0.52 Nb 0.14 N) and Ti 0.40 Al 0.53 Ta 0.07 N (Ti 0.34 Al 0.50 Ta 0.16 N) experience an increase of H to 34.7 ± 0.5 GPa (36.7 ± 0.7 GPa) and 35.8 ± 1.0 GPa (37.0 ± 1.1 GPa) when annealed at 1000 °C, compared to the 32.4 ± 0.7 GPa of Ti 0.46 Al 0.54 N annealed at 900 °C. The relative H increase is thus higher for (Ti,Al,Nb)N than for (Ti,Al,Ta)N. Furthermore, Nb and Ta also improve the oxidation resistance of (Ti,Al)N with Ta being more effective than Nb. Based on these results we can conclude that both Nb and Ta elements improve hardness, thermal stability, and oxidation resistance of (Ti,Al)N, with Nb providing more relative hardness gain but Ta providing higher absolute values.

Improving The Morphological Stability Of Nickel Germanide By Tantalum And Tungsten Additions

Morphological Instability of Ag Films Caused by Phase Transition in the Underlying Ta Barrier Layer

Thermal Stability Enhancement of NiGe Metal Source/Drain and Ge Pmosfets by Dopant Segregation

Electromigration Behavior of Cu Metallization Interfacing with Ta Versus TaN at High Temperatures

Morphology and Electrical Performance Improvement of NiGe/Ge Contact by P and Sb Co-implantation

Microstructure and properties of intermetallic compounds of W/Ni/Ta diffusion couple

Enhancing the Stability and Performance of Ni-rich Cathode Materials through Ta Doping: A Combined Theoretical and Experimental Study

Influence of Tantalum/tantalum Nitride Barriers and Caps on the High-Temperature Properties of Copper Metallization for Wide-Band Gap Applications

Effect of tantalum and Ni Ta barriers on inter-diffusion between nickel coating and GH3535 alloy at 700 °C

Metastable Ta2N3 with Highly Tunable Electrical Conductivity Via Oxygen Incorporation

First-Principles and Experimental Study of Ge, V, Ta-Doped AgNi Electrical Contact Materials

Metal Stanogermanide Contacts with Enhanced Thermal Stability for High Mobility Germanium-Tin Field-Effect Transistor

Improvement of Nickel-Stanogermanide Contact Properties by Platinum Interlayer

Ab initio supported development of Nb- and Ta-alloyed (Ti,Al)N thin films with improved thermal stability

Metastable transformation behavior in a Ta-containing TiAl-Nb alloy during continuous cooling

Effect of tantalum addition method on microstructure and mechanical properties of the 90(W 20Ta)–Ni–Fe alloy

Enhancing the Integral Structural and Thermal Stability of Ultrahigh-Ni Cathodes via Morphology Refinement and In Situ Interfacial Engineering

Investigation on the influence of Ta on the microstructure evolution of Ni-based superalloy DZ411 during directional solidification, heat treatment, and long-term aging

Effect Of Platinum Interlayer On The Thermal Stability Improvement Of Nickel Stanogermanide

Microstructure and segregation behaviour of directionally solidified tungsten bearing 25Cr-35Ni-Nb heat-resistant stainless steels

Dependence on the Chromium Content of the High-Temperature Oxidation Behavior of Ta-Rich Nickel-Based Cast Alloys