Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Simple Chemical Reduction Route for the Synthesis of Cu-modified Co3O4 Nanosheet with Enhanced Performance As Anode Material in Lithium-Ion Batteries

Nanostructured hybrid cobalt oxide/copper electrodes of lithium-ion batteries with reversible high-rate capabilities

Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

Co3O4 nanosheets anchored on C/Cu porous microspheres as high-performance anode materials for lithium-ion battery

Facile preparation of Co3O4 nanoparticles incorporating with highly conductive MXene nanosheets as high-performance anodes for lithium-ion batteries

Nanoparticle Decorated Ultrathin Porous Nanosheets as Hierarchical Co3O4 Nanostructures for Lithium Ion Battery Anode Materials

Coo Nanosheets Derived from Electrodeposited Cobalt Metal Towards High Performance Lithium Ion Batteries

CuMn2O4/graphene Nanosheets As Excellent Anode for Lithium-Ion Battery

Ultrathin nanosheets-decorated honeycomb-like Co3O4 porous balls for high performance lithium-ion batteries

Micro-/Nanostructured Co3O4 Anode with Enhanced Rate Capability for Lithium-Ion Batteries

Superior-capacity Binder-Free Anode Electrode for Lithium-Ion Batteries: CoxMny NizO Nanosheets with Metal/oxygen Vacancies Directly Formed on Cu Foil

Synthesis of Copper Oxide Nanostructures Via a Composite-Hydroxide-mediated Approach: Morphology Control and the Electrochemical Performances As Anode Material for Lithium Ion Batteries

Nanoparticle Decorated Ultrathin Porous Nanosheets As Hierarchical Co 3 O 4 Nanostructures for Lithium Ion Battery Anode Materials

Controllable synthesis of core-shell Co@CoO nanocomposites with a superior performance as an anode material for lithium-ion batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

CuO Ultrathin Nanosheets Decorated Reduced Graphene Oxide As a High Performance Anode for Lithium-Ion Batteries

Self-Templating Synthesis of Hollow Co3O4 Nanoparticles Embedded in N, S-Dual-Doped Reduced Graphene Oxide for Lithium Ion Batteries.

Facile One-Step Synthesis of Cu2O@Cu Sub-Microspheres Composites As Anode Materials for Lithium Ion Batteries

Facile Scalable Synthesis of Co3O4/carbon Nanotube Hybrids As Superior Anode Materials for Lithium-Ion Batteries

Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Morphology-tunable synthesis of CuO modified with Cu-Zn/Cu-Sn intermetallic compounds as high-performance anode for lithium-ion batteries