Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Ultrathin nanosheets-decorated honeycomb-like Co3O4 porous balls for high performance lithium-ion batteries

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Lamellarly Stacking Porous N, P Co-Doped Mo2 C/C Nanosheets as High Performance Anode for Lithium-Ion Batteries

Nanostructured hybrid cobalt oxide/copper electrodes of lithium-ion batteries with reversible high-rate capabilities

Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Porous Co3V2O8 Nanosheets with Ultrahigh Performance As Anode Materials for Lithium Ion Batteries

Co3O4 nanosheets anchored on C/Cu porous microspheres as high-performance anode materials for lithium-ion battery

Nanoparticle Decorated Ultrathin Porous Nanosheets as Hierarchical Co3O4 Nanostructures for Lithium Ion Battery Anode Materials

Nanoparticle Decorated Ultrathin Porous Nanosheets As Hierarchical Co 3 O 4 Nanostructures for Lithium Ion Battery Anode Materials

Co3o4/Porous Carbon Nanofibers Composite As Anode for High-Performance Lithium Ion Batteries with Improved Cycle Performance and Lithium Storage Capacity

Micro-/Nanostructured Co3O4 Anode with Enhanced Rate Capability for Lithium-Ion Batteries

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

Honeycomb-like 3D ordered macroporous SiO x /C nanoarchitectures with carbon coating for high-performance lithium storage

Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Formation of highly porous CuCo2O4 nanosheet assemblies for high-rate and long-term lithium storage

Facile synthesis of porous hollow Co3O4 microfibers derived-from metal-organic frameworks as an advanced anode for lithium ion batteries

Porous Polyhedral and Fusiform Co3O4 Anode Materials for High-Performance Lithium-Ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Controllable Synthesis of Mesoporous Peapod‐like Co3O4@Carbon Nanotube Arrays for High‐Performance Lithium‐Ion Batteries

High performance of Co 3 O 4 @carbon composites as anodes for Lithium‐ion batteries

Rigid TiO2- x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes