Abstract:The mechanical properties of polymethyl methacrylate (PMMA) are still far from ideal to fulfill the perfect mechanical requirements for dental applications. The purpose of this study was to evaluate the effect of addition of silanized silicon dioxide Nano filler (SiO2) and carbon nanotube on some properties of heat cured acrylic resin denture base material.Materials and methods: One hundred sixty (160) prepared specimens were divided into 4 groups according to the tests, each group consisted of 40 specimens and these were subdivided into 4 groups (unreinforced heat cured acrylic resin as control group),reinforced acrylic resin with (1%wt carbon nanotube and 3%wt silanized silicon dioxide) group and reinforced acrylic with(1.5%wt carbon nanotube and 5%wt silanized silicon dioxide)and reinforced acrylic with (1.5%wt carbon nanotube and 7%wt silanized silicon dioxide) .The tensile strength, transverse strength, indentation hardness(shore D), water sorption and solubility were investigated . The results were statistically analyzed using ANOVA test with LSD multiple comparisons.Results: The result of this study shows a highly significant increase in tensile strength, surface hardness, transverse strength and significant decrease water sorption and water solubility with studied groups (the addition of carbon nanotube and silanized silicon dioxide) to PMMA than control group, also the best results were obtained with acrylic resin reinforced with(1.5%wt carbon nanotube and 5%wt silanized silicon dioxide).Conclusion: The addition of a mixture of carbon nanotube (1.5%wt) and silanized nano silicon dioxide (5%wt) to PMMA acrylic resins improves its mechanical and physical properties.

Effects of Nano-Silicon Dioxide Surface Modification on the Morphology and Mechanical Properties of ABS/PMMA Blends

Effect of Surface Modifiers and Surface Modification Methods on Properties of Acrylonitrile–butadiene–styrene/poly(methyl Methacrylate)/nano‐calcium Carbonate Composites

Study on Mechanical and Flow Properties of Acrylonitrile-Butadiene-Styrene/Poly(Methyl Methacrylate)/Nano-Calcium Carbonate Composites

Control of morphology and properties by the selective distribution of nano-silica particles with different surface characteristics in PA6/ABS blends

Effect of Nanoparticles on the Mechanical Properties of Acrylonitrile–butadiene–styrene Specimens Fabricated by Fused Deposition Modeling

Modified nano-silica by two kinds of coupling agents influences the mechanical properties of resin base

Toughening PMMA with modified nano-SiO2 particles

Surface Modification Design for Improving the Strength and Water Vapor Permeability of Waterborne Polymer/SiO 2 Composites: Molecular Simulation and Experimental Analyses.

Surface Modification Design for Improving the Strength and Water Vapor Permeability of Waterborne Polymer/SiO<sub>2</sub> Composites: Molecular Simulation and Experimental Analyses

[Effect of Nano ZrO2 on Flexural Strength and Surface Hardness of Polymethylmethacrylate].

Preparation and Properties of BOZ/BMI/BADCy Copolymers Modified by Nano-SiO_2

Effect of the Number of Extrusion and Compatibilizing Agent on the Mechanical Properties of ABS/PMMA

Properties of ABS/PMMA Binary Blend and ABS/PMMA/MBS Ternary Blend

ENHANCED MECHANICAL PROPERTIES OF POLYPROPYLENE/SILICA NANOCOMPOSITES WITH SURFACE MODIFICATION OF NANO-SILICA VIA IN SITU COPOLYMERIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

Modified Silicon Nitride Nanopowder Coating and Its Influence on the Dynamic Mechanical Property of Polymethyl Methacrylate Nanocomposite

Surface‐modified Silica Nanoparticles for Reinforcement of PMMA

Effects of nano-SiO_2 on reinforcing and toughening polypropylene

Evaluation the Effect of Adding Silanized Silicon Dioxide Nano Filler and Carbon Nanotube Composite on Some Properties of Heat Cured Acrylic Denture Base Material

Structure-property Relationships of In-Situ PMMA Modified Nano-Sized Antimony Trioxide Filled Poly(vinyl Chloride) Nanocomposites

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Modification of the Grafting Character to Prepare PA6/ABS-g-MA Blends with Higher Toughness and Stiffness