Abstract:Objective To Treating the nano-SiO2 particle by silicon coupling reagent,functionalize the SiO2 by making double bond on its surface. Polymerizing on the surface of nano-SiO2 surface by the method called emulsion polymerization,the nano-SiO2 is covered by polymer to get the PMMA-KH-570-nano-SiO2 complex material. Test the surface structure of the surface of nano-SiO2 by FTIR,and test sort of its mechanical performances.Comparing the treated nano-SiO2 which is directly dispended in the PMMA emulsion with the SiO2 without any treatment(control group) ,we are trying to find an effective method which can not only increase the dispersion of SiO2,but also improve the mechanical performance of the artificial teeth. Methods Coupling agent KH-570 will be treated with nano-SiO2 through graft PMMA,have been prepolymer by the hot-melt molding system in the experimental group were the standard sample;1.KH-570 will betreated nano-SiO2 dispersed directly to PMMA emulsion,as a hot-melt molding system in the control group of standard sample;2. The use of laboratory methods to produce PMMA,is the standard blank Group 1 sample;3.Clinical Tray will be made of powder blank Group 2 of the standard sample;4.On the surface modified nanoparticles SiO2 for FTIR characterization testing;5.PMMA on the nano-composites for FTIR characterization testing;6.Of the four standard sample for testing mechanical properties,by comparing four different mechanical properties of materials,combined with literature,for coupling nano-SiO2 surface modified PMMA,as well as the role and mechanism analysis and discussion. Results FTIR:FTIR proved successful in SiO2 on the surface of the bonding agent KH-570,On the basis of the g-PMMA macromolecules,The realization of the SiO2 nanoparticles surface modified. PMMA in its dispersion strengthening. 1.Sample surface by SEM observation,reached a preliminary nano-dispersion. 2.Flexural modulus of elasticity and experimental results show that after the grafting of nanocomposite mechanical properties than a blank group increased 98.7%,an increase of about 2 blank group 10.4%. Conclusion By coupling agent KH-570 on nano-SiO2 surface modified to be effective and feasible,coupling with SiO2 surface chemical reaction occurred,so that the nano-SiO2 in the PMMA in the increased spread:1.By the KH-570-treated nano-SiO2 with PMMA graft copolymer,which obtained the nanocomposites can be further enhanced artificial teeth denture strength and toughness.2.A preliminary system of P(MMA-KH-570-SiO2) nanocomposites although the laboratory system was decentralized in the PMMA,the mechanical properties of a substantial improvement,but clinical comparison of the Tray powder used to raise limited. The reason may be in the process is not perfect. But also in the future to further improve the process,compared to the clinical use of powder Tray also raised greatly.

Toughening PMMA with modified nano-SiO2 particles

Mechanical Properties of Polymer Nanocomposites with Randomly Dispersed and Cross-Linked Two-Dimensional Diamond

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Modified Silicon Nitride Nanopowder Coating and Its Influence on the Dynamic Mechanical Property of Polymethyl Methacrylate Nanocomposite

Silica silanization graft-strengthening bone cement poly(methyl methacrylate): process and dynamic mechanical properties

Preparation of a novel SiO2/PMMA nanocomposite with high transparency, thermal stability, and superior surface hardness via gamma‐radiation polymerization

Surface Mechanical Properties of Transparent Poly(methyl Methacrylate)/zirconia Nanocomposites Prepared by in Situ Bulk Polymerization

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Toughness Enhancement of Poly(methyl methacrylate) (PMMA)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Nanocomposites by Multiwall Carbon Nanotubes (MWNT)

Preparation and Properties of PMMA Blends with High Toughness

Preparation and Characterization of Silica/Pmma Composites with Highly Dispersed Silica Nanoparticles Dispersion of Nanosilica in Mma

Toughening of Epoxy Resin with Poly(Methyl Methacrylate) Grafted Silica Core-Shell Particles

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Synthesis and characterization of (4-arm-star-PMMA)/PMMA-g-SiO2 hybrid nanocomposites

The research about improving the performance of the material of artificial teeth by drafting PMMA on SiO2 surface

Enhanced Properties of Poly(vinylidene Fluoride) with Low Filler Content SiO 2 -G-(mma-co-ba) Core-Shell Nanoparticles

Preparation and Morphology of SiO 2 /PMMA Nanohybrids by Microemulsion Polymerization

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

Compatibilization of poly(methyl methacrylate) and cellulose nanocrystals through co‐continuous phase to enhance the thermomechanical properties