Abstract:Sorption-enhanced steam methane reforming (SESMR) can produce high-purity H2 in one step, while removing CO2 to reduce carbon emissions. The sorbents, catalysts or bifunctional composite used in this system typically exist in powder form, which is difficult to use in industrialized fluidized bed reactors. Granulation can effectively avoid reactor clogging, increase practicality and operability of the system. In this work, Al-modified CaO-based sorbents were granulated using the graphite-casting method and test its sorption-enhanced hydrogen production effects during methane steam reforming. The effects of granulation on the microstructure, carbonation reactivity and mechanical properties were characterized. The reaction conditions (temperature and water-gas ratio) and the combination method of catalyst and sorbent (powder mixing, pellets mixing, layered placement and bifunctional materials mixed evenly at the molecular level) on hydrogen yield were investigated. Results showed that CaO-based pellets after granulation had a fluffy and porous structure, exhibited excellent adsorption performance under low CO2 partial pressure. The average crushing load of 75Ca25Al and 15Ni70Ca15Al pellets exceeded 6 N, showing good mechanical strength. The optimal reaction temperature range was found to be 550–600 °C. Increasing the water-gas ratio and reducing the flow rate were effective ways of improving CH4 conversion and H2 purity. The bifunctional 15Ni70Ca15Al powder prepared by sol-gel method had no catalytic effect on CH4–H2O reforming at 600 °C. After granulation, the catalytic performance was improved and the purity of H2 reached 95%, but it declined rapidly during multiple SESMR cycles. In the case of mixed of two pellets (catalyst and sorbent), the outlet H2 reached almost 100% with no decay observed over 15 cycles. When the switching time of feed gas was set to 60 min, high-purity (>96%) hydrogen can be produced continuously for 600 min on the parallel two fixed-bed reactors.

Calcium Cobaltate: a Phase-change Catalyst for Stable Hydrogen Production from Bio-glycerol

The ReSER-COG Process for Hydrogen Production on a Ni–CaO/Al2O3 Complex Catalyst

A sorption catalyst complex with nano CaCO3 precursor for hydrogen production used in reser process

The Microstructure and Stability of a Ni-nano-CaO/Al2O3 Reforming Catalyst under Carbonation–calcination Cycling Conditions

Stability of the Ni–TiO2@nano CaO/Al2O3 Complex Catalyst Used in ReSER Process for Hydrogen Production

The Characteristics of A Sorption-Enhanced Steam-Methane Reaction for the Production of Hydrogen Using Co2 Sorbent

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

Pt-Calcium-Cobaltate Enables Sorption-Enhanced Steam Reforming of Glycerol Coupled with Chemical Looping CH4 Combustion

Pt–calcium cobaltate enables sorption‐enhanced steam reforming of glycerol coupled with chemical‐looping CH 4 combustion

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

High-throughput Design of Complex Oxides As Isothermal, Redox-Activated CO2 Sorbents for Green Hydrogen Generation

Perovskite-Based Phase Transition Sorbents for Sorption-Enhanced Oxidative Steam Reforming of Glycerol

Influence of CoAl2O4 spinel and Co-phyllosilicate structures derived from Co/sepiolite catalysts on steam reforming of bio-oil for hydrogen production

Sorption-enhanced Steam Methane Reforming by in Situ CO 2 Capture on a CaO–Ca 9 Al 6 O 18 Sorbent

Steam Methane Reforming Reaction Enhanced by a Novel K2CO3-Doped Li4SiO4 Sorbent: Investigations on the Sorbent and Catalyst Coupling Behaviors and Sorbent Regeneration Strategy

High-purity hydrogen production from biogas by sorption-enhanced steam reforming over Ni-MgO-CaO bifunctional catalyst with paper fiber as template

A review of CO2 sorbents for promoting hydrogen production in the sorption-enhanced steam reforming process

Calcium-based pellets for continuous hydrogen production by sorption-enhanced steam methane reforming

Sorption-enhanced Chemical Looping Steam Reforming of Glycerol with CO2 In-Situ Capture and Utilization

Enhanced H2 Recovery by Coupling the Water-Gas Shift Reaction with in-situ CO2 Capture and Mineralization using Earth Abundant Ca- and Mg-Silicates and Hydroxides

High-purity hydrogen production by sorption-enhanced steam reforming of iso-octane over a Pd-promoted Ni-Ca-Al-O bi-functional catalyst