Abstract:In contrast to alternating current(AC) power transmission,direct current(DC) power transmission has a series of advantages,such as low line loss and nonexistence of the problem of system synchronous operation stability.In recent years, with the rapid development of voltage source converter technology with higher voltage,the study on flexible multi-terminal high voltage direct current transmission(HVDC) system,DC transmission and distribution power net,as well as the related key technologies and equipments such as the high-voltage DC circuit breaker (DC-breaker) has captured great attention from the community at home and abroad.The research status of three types of DC-breakers(spoken of as the mechanical type,all-solid-state and hybrid type DC-breakers) and their topologies,working principles,advantages as well as disadvantages are briefly treated.It is concluded that the hybrid type should be the main trend of development for high-voltage DC-breakers. Furthermore,a scheme of hybrid DC-breakers with fault current limiting is proposed, its feasibility verified through simulation.In this scheme the DC-breaker adopts the hybrid solid-state switch (composed of half and full gate-controlled devices in series connection) which is paralleled with a mechanical breaker involving the fault-current-limiting technology. Therefore the rising rate of short-circuit current can be effectively restrained,relieving the requirement on fault diagnosis sensitivity and mechanical breaker speed.Moreover,the series quantities of solid-state switching devices (especially the expensive full gate-controlled devices such as the insulated gate bipolar transistor)in high voltage application,and the technical difficulty and production costs etc will be reduced.

Influence of Paralleled Capacitor on Paralleled High-voltage SF6 Circuit Breakers with Highly Coupled Split Reactor

Interrupting Characteristics of Paralleled Sf6 Circuit Breakers with A Highly Coupled Split Reactor

Simulation Research on the Effect of the Paralleled Compensating Capacitor on the Solid State Fault Current Limiter Operation

Interrupting Process Simulation of HCSR Based 252 kV、85 kA Large Capacity Short-Circuit Current Breaking Device

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

Simulation Study of Series Resonance Type Fault Current Limiter

Analysis and Design in Extra High Voltage Circuit Breakers Employing Shunted Capacitors

A Scheme for Current-limiting Hybrid DC Circuit Breaker

SF 6 Passive Resonance DC Circuit Breaker Combined with a Superconducting Fault Current Limiter

Research On A Novel Two-Stage Direct Current Hybrid Circuit Breaker

Simulation Of Breaking Characteristics Of A 550 Kv Single-Break Tank Circuit Breaker

A DC Hybrid Circuit Breaker with Buffer Capacitor and Vacuum Interrupters

Simulation Research on the Post-arc Dielectric Recovery Characteristics of Multi-break Vacuum Circuit Breakers

Application of arc breaking simulation in development of extra high voltage SF<sub>6</sub> circuit breaker

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

Technical Assessment on Self-Charging Mechanical HVDC Circuit Breaker

Voltage Sharing Between Mechanical Switch and IGBT in a Hybrid DC Circuit Breaker

Modelling of the Interruption Process in Sf6 High Voltage Circuit Breaker and Preliminary Study of the Arc Characteristics for Different Gases

DC Circuit Breaker Using Superconductor for Current Limiting

Research On Current Commutation Measures For Hybrid Dc Circuit Breakers

Studyon High Voltage and LargeCapacity Vacuum Interrupters