Abstract:The capacity of the electric grid in China is undergoing rapid expansion to keep pace with the fast economic growth. The annual gross production of the UHV products exceeded 100 billion RMB (approximately 12 billion Euro). Therefore the design and optimization technology for UHV SF6 gas circuit breakers are very demanding. Based on the two-dimensional magneto-hydrodynamic (MHD) model and a commercial CFD (computational fluid dynamics) software, FLUENT, a computer simulation tool for the design and optimization for UHV SF6 gas circuit breaker is established. Nozzle ablation effect is considered by introducing an independent mass conservation equation for the ablated material to the overall conservation equations of mass, momentum, and energy. The ohmic heating and the radiation of the electric arc are considered in the model by adding relevant source terms. Both the thermal interruption capability and the dielectric interruption capability can be numerically predicted. To predict the thermal interruption capability, the arc conductance 200ns before current zero is used as an indicator. The CFD model is applied for the high current arcing phase, and Mayr arc model is used near the current zero period. To predict the dielectric interruption, both the reduced electric field strength and the reduced critical electric filed strength everywhere inside the interrupter are computed and compared, to judge the occurrence of the electric breakdown. The validity of the present simulation model is verified by comparison of the simulation results with the experimental results such as voltage, currents of the arc and pressure rises Type here the email address of the main author as a footnote. inside the interrupter during the arc interruption. The numerical prediction by the simulation tool is verified by the direct interrupting test of 550kV GCB, too. The developed computer simulation tool was applied in the design of a 550kV GCB. Significant benefits have been achieved in terms of both the cost saving and shorten of the development cycle. The paper is organized as follows: the governing equations of the simulation model based on the 2-dimensional MHD model are presented in section 2. The numerical prediction of the thermal interruption capability of the SF6 GCB is described in section 3. The numerical prediction of the dielectric interruption capability of the SF6 GCB is described in section 4. In section 5 the experimental set-ups as well as the experimental results are presented and compared with the simulated ones. The numerical predictions agree well with the experiments. Finally conclusion is drawn in section 6.

Interrupting Process Simulation of HCSR Based 252 kV、85 kA Large Capacity Short-Circuit Current Breaking Device

Interrupting Characteristics of Paralleled Sf6 Circuit Breakers with A Highly Coupled Split Reactor

Simulation Of Breaking Characteristics Of A 550 Kv Single-Break Tank Circuit Breaker

Application of arc breaking simulation in development of extra high voltage SF<sub>6</sub> circuit breaker

Computer simulation tool for the design and optimation for UHV SF6 circuit breakers

Influence of Paralleled Capacitor on Paralleled High-voltage SF6 Circuit Breakers with Highly Coupled Split Reactor

Numerical Simulation of Gas Flow During Arcing Process for 252 Kv Puffer Circuit Breakers

SF 6 Passive Resonance DC Circuit Breaker Combined with a Superconducting Fault Current Limiter

Numerical Simulation Method for the Interrupting Characteristic of SF6 Circuit Breakers

Research on the Breaking Branch for a Hybrid DC Circuit Breaker In±500 Kv Voltage‐sourced Converter High‐voltage Direct Current Grid

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

DC Interrupting with Self-Excited Oscillation Based on the Superconducting Current-Limiting Technology

A comparative study of N2 and SF6 arcing process for 252kV puffer circuit breaker based on a novel simulation model

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

Research On A Novel Two-Stage Direct Current Hybrid Circuit Breaker

Modelling of the Interruption Process in Sf6 High Voltage Circuit Breaker and Preliminary Study of the Arc Characteristics for Different Gases

A Novel Superconducting Current Limiting Type SF6 Gas DC Circuit Breaker Assisted by Quenching Voltage

Research On A Novel Bidirectional Direct Current Circuit Breaker

Simulation and Analysis on the Interruption Process of Hvdc Vacuum Switch with Forced Current Zero

The Design and Development of a Novel 10 Kv/60 Ka Hybrid DC Circuit Breaker Based on Mixed Solid-State Switches

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker