Abstract:Silicon has attracted much attention as a promising anode material in lithium-ion batteries owing to its high specific capacity. However, silicon anode suffers large volume expansion during periodical lithiation/delithiation processes, leading to particle pulverization and thus electrochemical performance degradation. Herein, we report a water-soluble three-dimensional network polymer binder for silicon anode in which the introduced poly(ethylene glycol) and divalent cation Ca2+ can form chemical cross-linking and physical cross-linking with poly(acrylic acid), respectively. Poly(ethylene glycol) serves as a soft segment to regulate the mechanical properties of the polymer, and the divalent cation Ca2+ acts as a physical cross-linking agent to form a dual network with poly(acrylic acid). The multiple network binder owns good mechanical strength, strain resistance ability, and strong adhesion with Si particles and Cu collector, thereby preserving the stability of the silicon electrode. Therefore, silicon anode with this rationally designed binder exhibits excellent electrochemical performance with a discharge capacity of 1596 mAh/g after 800 cycles at a current density of 2 A/g. This design can provide a way to alleviate the volume expansion of the silicon anode and other high-capacity alloy anodes with large volume change for advanced batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02231.FTIR spectra of AA, PEG, PAA-PEG, and PAA-PEG-Ca2+; BJH pore volume of Si particles; SEM image of Si particles; CV curves of the PAA-PEG-Ca2+-SiNP, PAA-PEG-SiNP, and PAA-SiNP electrodes at a scanning rate of 0.05 mV/s; discharging capacity of electrodes with different ratios of PAA-PEG and Ca2+ binders when measured at 1.2 A/g; photograph and SEM images of Li metal and separator before and after cycles; and SEM image of the Si electrode before cycling (PDF)This article has not yet been cited by other publications.

Synthesis of Triblock Copolymer Polydopamine-Polyacrylic-polyoxyethylene with Excellent Performance As a Binder for Silicon Anode Lithium-Ion Batteries

Polydopamine blended with polyacrylic acid for silicon anode binder with high electrochemical performance

Partially Carbonized Polymer Binder with Polymer Dots for Silicon Anodes in Lithium-Ion Batteries.

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Epoxy Cross-Linking Enhanced the Toughness of Polysaccharides As a Silicon Anode Binder for Lithium-Ion Batteries.

A Robust Network Binder Via Localized Linking by Small Molecules for High-Areal-capacity Silicon Anodes in Lithium-Ion Batteries

Glycinamide modified polyacrylic acid as high-performance binder for silicon anodes in lithium-ion batteries

Re‐Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium‐Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

A Highly Efficient Silicone-Modified Polyamide Acid Binder for Silicon-Based Anode in Lithium-Ion Batteries

Polydopamine Wrapping Silicon Cross-linked with Polyacrylic Acid as High-performance Anode for Lithium Ion Batteries.

Improved Adhesion of Cross-Linked Binder and SiO2-coating Enhances Structural and Cyclic Stability of Silicon Electrodes for Lithium-Ion Batteries

Poly (acrylic Acid Sodium) Grafted Carboxymethyl Cellulose As a High Performance Polymer Binder for Silicon Anode in Lithium Ion Batteries

Radical-Scavenging Activatable and Robust Polymeric Binder Based on Poly(acrylic acid) Cross-Linked with Tannic Acid for Silicon Anode of Lithium Storage System

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon‐Based Lithium‐Ion Battery Anode

High-Performance Carboxymethyl Cellulose Integrating Polydopamine Binder for Silicon Microparticle Anodes in Lithium-Ion Batteries

Vinyltriethoxysilane Crosslinked Poly(acrylic Acid Sodium) As a Polymeric Binder for High Performance Silicon Anodes in Lithium Ion Batteries.

A highly crosslinked polymeric binder for silicon anode in lithium-ion batteries

A High-Performance Polyurethane–Polydopamine Polymeric Binder for Silicon Microparticle Anodes in Lithium-Ion Batteries

Interpenetrated Gel Polymer Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries

Multiple Network Binders via Dual Cross-Linking for Silicon Anodes of Lithium-Ion Batteries