Abstract:The present study investigated the effect of brazing temperature and holding time on the microstructure and mechanical properties of Ti2AlC-copper joints brazed with Ag-Cu filler alloy at 800–900°C for 10min and held for different times at 850°C. The representative structure of the joints was Ti2AlC/interaction area in the Ti2AlC substrate/brazing layer/diffusion area of the copper substrates/Cu. The brazing layer was composed of Cu-rich phases, AlCu2Ti intermetallic compounds and Ag[Cu] solid solutions. With increasing brazing temperature, more filler alloy was infiltrated into the ceramic substrate and reacted with Ti2AlC, accelerating the decomposition of Ti2AlC and the formation of Ti3AlC2, TiC and AlCu2Ti reaction phases. Moreover, more copper substrate was dissolved into the filler alloy; thus, more Cu-rich phase and AlCu2Ti were produced in the brazing layer. Moreover, the width of the brazing layer was reduced, while the widths of both the interaction area and diffusion area increased. As the brazing temperature was increased, the shear joint strength increased and then decreased. By prolonging the holding time, the widths of both the interaction area and the diffusion area were increased, while the width of the brazing layer was held constant at approximately 50μm. Neither the structure nor the shear strength of the joints was influenced by the holding time. The optimum brazing parameters for joining Ti2AlC ceramic to copper with Ag-Cu filler alloy were 850°C for 40min. The joints obtained exhibit a maximum shear strength of 203.3MPa.

Microstructure and Mechanical Properties of Transparent Alumina and TiAl Alloy Joints Brazed Using Ag-Cu-Ti Filler Metal

Microstructure evolution and mechanical properties of ZrO 2 /TiAl joints vacuum brazed by Ag–Cu filler metal

Microstructure and properties of the TiAl/GH3030 dissimilar joints vacuum-brazed with a Ti-based amorphous filler metal

Processing, microstructure and mechanical properties of vacuum-brazed Al 2O 3/Ti6Al4V joints

Microstructure evolution and mechanical properties of TiAl/GH536 joints vacuum brazed with Ti–Zr–Cu–Ni filler metal

Microstructure and Mechanical Properties of Ti6Al4V to Al2O3 Brazed Joints Using Ti-Ag/Cu-Ti Thin Films

Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joints brazed using Ag-Cu filler alloy

Microstructure and Mechanical Properties of the AlON / Ti6Al4V Active Element Brazing Joint

Interface structure and shear strength of brazed joints of TiAl-based alloy to middle-carbon steel

Comparative Study on Microstructure and Strength of TiAl/Steel Joints Brazed with Ag-Cu-Ti and Ag-Cu-Zn Filler Metals

Interfacial microstructure and mechanical properties of porous-Si3N4 ceramic and TiAl alloy joints vacuum brazed with AgCu filler

Microstructure and shear strength of γ-TiAl/GH536 joints brazed with Ti−Zr−Cu−Ni−Fe−Co−Mo filler alloy

Microstructural Evolution and Mechanical Properties of Vacuum Brazed Ti 2 AlNb Alloy and Ti60 Alloy with Cu75 P T Filler Metal

Interfacial microstructure and properties of TiAl joints brazed with composite filler reinforced by particles

Relationship between microstructure and mechanical properties of TiAl/Ti2AlNb joint brazed using Ti-27Co eutectic filler metal

Effect of Brazing Temperature on Microstructure and Mechanical Properties of TiAl/ZrB2 Joint Brazed with CuTiZrNi Filler

Interfacial Microstructure Evolution and Mechanical Properties of Al2O3/Al2O3 Joints Brazed with Ti–Ni–Nb Filler Metal.

Microstructural Evolution of Si3n4/Ti6al4v Joints Brazed with Nano-Si3n4 Reinforced Agcuti Composite Filler

Microstructure and shear property of high-temperature brazing of TiAl alloy and 316L stainless steel with a Ni-based amorphous filler

Effect of brazing temperature on interfacial microstructure and mechanical property of Ti60/AgCu/ZrO2 joint

Research on the Interfacial Structure and Properties of TiAl - Si3N4f/Si3N4 Brazed Joints