Abstract:The ultra-precision displacement measurement was researched for the work table of a Scanning Beam Interference Lithography (SBIL) tool to improve its environmental robustness.For the displacement measuring requirement of the work table of the SBIL tool,a novel heterodyne Littrow Grating Interferometer (GI)displacement measurement system with high environmental robustness was proposed.The measuring principle of the heterodyne Littrow grating interferometer was introduced,and the design of the system and dead path error modeling method based on Elden equation was performed.An integrated mini grating interferometer with a size of 48 mm×48 mm× 18 mm was fabricated.Then,the dead path error of the system was calculated based on the model.The calculation result indicates that the dead path error caused by a relative large environmental fluctuation (temperature fluctuation in (干)0.01 ℃,pressure fluctuation in ±7.5 Pa,humidity fluctuation in (干)1.5％,andCO2 content fluctuation in ±50× 10-6) is only ±0.05 nm.Finally,a comparison system based on the commercial plane mirror interferometer (PMI) and GI was designed for the principle verification and measurement stability experiment.The principle verification demonstrates that the principle of the system is right and the resolution reaches to 0.41 nm.The measurement stability experiment shows that the dead path error of GI and PMI caused by the environmental fluctuation are respectively 7.59nm (3σ)@＜0.9 Hz&1～10 Hz and 31.11 nm (3σ)@＜0.9 Hz&1～10 Hz in a conventional laboratory environment,which indicates the environmental robustness of the GI is higher than that of the PMI.

A displacement measurement system for ultra-precision heterodyne Littrow grating interferometer

Anti Light Disturbance Analysis of the Measurement of High Precision micro Displacement

Modified Homodyne Laser Interferometer Based on Phase Modulation for Simultaneously Measuring Displacement and Angle.

Common-path and compact wavefront diagnosis system based on cross grating lateral shearing interferometer.

Robust Unbalanced Gires-Tournois Mirror for Group Delay Dispersion Measurement Evaluation by White Light Interferometer

A Wavelength-Stabilized and Quasi-Common-Path Heterodyne Grating Interferometer With Sub-Nanometer Precision

A High-Resolution Displacement Sensor Based on a Grating Interferometer with the Phase Modulation Technique

High-precision 2D grating displacement measurement system based on double-spatial heterodyne optical path interleaving

A Reflective-Type Heterodyne Grating Interferometer for Three-Degree-of-Freedom Subnanometer Measurement

Heterodyne Three-Degree-of-freedom Grating Interferometer for Ultra-Precision Positioning of Lithography Machine

Grating Interferometry with High Optical Subdivision

Study of interferometric signal correction methods in ultra-precision displacement measurement

An ultracompact high-resolution displacement sensor based on self-interference effect of single optical nanograting

Equivalent Measurement and Real-Time Compensation of Error Caused by Intensity Change in Deep Sub-Nanometer Displacement Measuring Interferometry

Grating Interferometer with Redundant Design for Performing Wide-Range Displacement Measurements

Bidirectional two-degree-of-freedom grating interferometer with biased Littrow configuration

High-precision Microdisplacement Sensor Based on Zeroth-Order Diffraction Using a Single-Layer Optical Grating.

Towards Large Scale Atomic Manufacturing: Heterodyne Grating Interferometer with Zero Dead-Zone

Ultraprecision Real-Time Displacements Calculation Algorithm For The Grating Interferometer System

Precision Displacement Measurement with Nanometer Resolution Based on Transmissive Laser Air-Wedge Interference

Real-time Displacement Calculation and Offline Geometric Calibration of the Grating Interferometer System for Ultra-Precision Wafer Stage Measurement