Abstract:The fluid catalytic cracking (FCC) unit is a typical multi-timescale system. Its operational performance will make a significant difference in the overall economic benefits of the oil refining factory. Classical model-based optimization approaches may not always be completely satisfied due to unmeasurable disturbances and model-plant structure mismatch. A distributed economic MPC with pseudo-steady state modifier adaptation (DEMPC-MA) is proposed to cope with the difficulties. The strategy divides the plant into two parts, i.e., the slow dynamic part and pseudo-steady state part. The output modifier adaption is adopted to modify the model function according to the pseudo-steady state characteristics of the riser. Lyapunov stable constraints are added to the EMPC problem to guarantee a safe operation, while the feasibility of the algorithm is ensured by a set of auxiliary controllers, which are constructed offline based on the multi-model approach. The overall control optimization problem is solved in a distributed formulation through the alternating direction method of multipliers (ADMM) to improve the calculation performance. The proposed algorithm was applied to an industrial FCC unit model based on a refinery factory in Jiujiang, China. The results showed that the method obtained better economic benefits and finally reached the optimal steady-state operating point even if the model structure and parameter of the prediction model were mismatched. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

Modeling And Parameter Estimation For Mip-Cgp Riser Reactor Of Fccl

A P systems based hybrid optimization algorithm for parameter estimation of FCCU reactor–regenerator model

Parameter Estimation of Catalytic Cracking Model Using PSO Algorithm

A Membrane Computing Optimization Algorithm with Multi-Subsystems for Parameter Estimation of Heavy Oil Thermal Cracking Model

Adaptive Cuckoo Search Algorithm for Parameter Estimation of Heavy Oil Thermal Cracking Model

Gray Wolf Optimizer with Bubble-Net Predation for Modeling Fluidized Catalytic Cracking Unit Main Fractionator

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Modeling and Parameter Identification of FCCU Regenerator with Modified Levenberg-Marquardt Algorithm

Implementation of Parameter Estimation in Mechanistic Models by Dynamic Optimization

Estimation of Time-Dependent Parameters of a Heat-Integrated Distillation Column System

Modeling and Optimization of a Fractionation, Absorption, and Stabilization System in an Industrial Fluid Catalytic Cracking Process

Thermal Energy Correction Based Model Predictive Control for Fluid Catalytic Cracking Riser

Prediction of molecular distribution and temperature profile of FCC process through molecular-level kinetic modeling

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Molecular-Level modeling for naphtha olefin reduction in FCC subsidiary Riser: From laboratory reactor to pilot plant

Moving Horizon Optimal Estimation for Temperature Distribution of FCCU Riser Reactor

Application of Modified Multi Model Predictive Control Algorithm to Fluid Catalytic Cracking Unit

Distributed Economic Model Predictive Control with Pseudo-steady State Modifier Adaptation for an Industrial Fluid Catalytic Cracking Unit

Modeling and simulation of FCCU reactor-regenerator system

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

Advanced model for turbulent gas–solid flow and reaction in FCC riser reactors