Abstract:The impact of shear deformation on texture evolution in strip-cast Fe-1.5%Si non-oriented electrical steel was studied combined with in-suit experiments and crystal plasticity finite element method (CPFEM). Throughout the deformation process, the texture evolution predominantly follows a traditional route: transitioning from {211}<036> and {411}<148> to {111}<112> orientation. In certain regions with specific stress conditions, orientation evolution shifts from {310}<236> to {411}<148>, {100}<021>, and finally to {100}<001> orientation. Crystal plasticity finite element (CPFE) simulation results show that the rotation of {310}<236> through {411}<148> to {100}<021> orientation, {211}<236> and {112}<110> orientations transition to {111} and {110} orientations, respectively, which is consistent with the experimental observations. Recrystallization texture mainly includes favorable λ and near-λ (<100>∥ND, normal direction) textures, with detrimental γ (<111>∥ND) texture essentially diminishing. In-situ heating experiments revealed {411}<148> as the primary recrystallization orientation, the mechanism involves both oriented nucleation and growth. In the edge region lacking stress constraints, the Schmid factor (SF) reaches up to 0.48, the (21-3)[111] slip system is preferentially activated, with shear bands appearing earlier in the same region. Indicating that when slip mechanism alone are inadequate for sustaining plastic deformation, the shear deformation becomes the favored mode of activation. {411}<148> orientation can serve as a transitional orientation for transitioning to {100} orientation, and further as an advantageous transitional orientation during the nucleation and growth of recrystallization. Due to the texture improvement, superior magnetic properties were achieved, with the average magnetic induction (B50) and iron loss (P1.5/50) being 1.77 T and 4.25 W/kg, respectively.

Texture Evolution and Inhomogeneous Deformation of Polycrystalline Cu Based on Crystal Plasticity Finite Element Method and Particle Swarm Optimization Algorithm

Modeling Texture Evolution During ECAP of Copper Single Crystal by Crystal Plasticity FEM

Simulation of Texture Evolution During Plastic Deformation of FCC, BCC and HCP Structured Crystals with Crystal Plasticity Based Finite Element Method

Crystal Plasticity Modeling of Texture Evolution and Heterogeneity in Equal Channel Angular Pressing of Aluminum Single Crystal

Phase-field Study for Texture Evolution in Polycrystalline Materials under Applied Stress

Coupled Effects of Initial Orientation Scatter and Grain-Interaction to Texture Evolution: a Crystal Plasticity FE Study

Texture Evolution Prediction of 2219 Aluminum Alloy Sheet under Hydro-Bulging Using Cross-Scale Numerical Modeling

Prediction of texture evolution under varying deformation states through crystal plasticity finite element method

Crystal Plasticity Investigation of Friction Effect on Texture Evolution of Al Single Crystal During ECAP

Combining crystal plasticity and phase field model for predicting texture evolution and the influence of nuclei clustering on recrystallization path kinetics in Ti-alloys

Crystal Plasticity Investigation of Texture Evolution of Al Single Crystal During Extrusion Through a Bent Channel

3D Simulation of Texture Evolution Induced Grain Coarsening in FCC Polycrystals During Severe Plastic Deformation

Modeling and Experiment of Deformation Texture Development for Pure Al by CPFEM with EBSD Data

Modeling Uniaxial Tensile Deformation of Polycrystalline Al Using CPFEM

Analysis of the texture evolution during multipass tube spinning of a TA15 alloy using the crystal plasticity finite element model

Deformation Heterogeneity and Texture Evolution of NiTiFe Shape Memory Alloy under Uniaxial Compression Based on Crystal Plasticity Finite Element Method

Modelling of Texture Evolution in High Pressure Torsion by Crystal Plasticity Finite Element Method

A New Quantitative Relation Between Deformation Textures and Corresponding Mechanical Properties of FCC Metals

A Study on the Texture Evolution Mechanism of Nickel Single Crystal Deformed by High Pressure Torsion

Special Texture Evolution Behavior of Strip-Cast Non-Oriented Electrical Steel Combined with In-Situ Experiment and Cpfem

A Polycrystal Plasticity Based Discontinuous Dynamic Recrystallization Simulation Method and Its Application to Copper