Abstract:A new kind of structural and functional integration ceramic matrix composite material was prepared from high‐performance alumina (Al2O3) fibers and absorbing silicon carbonitride (SiCN) ceramics via a combination of polymer infiltration pyrolysis (PIP) and chemical vapor infiltration (CVI) methods. The Al2O3 fiber annealed at its cracked temperature had enhanced permittivity, because the sizing agent on the Al2O3 fiber surface was cracked into pyrolysis carbon. For PIP+CVI Al2O3f /SiCN composites, PIP SiCN matrix with low conductivity was used as the matching phase, while CVI SiCN matrix with medium permittivity and dielectric loss was regarded as the reinforcing phase distributed in porous PIP SiCN matrix and inter‐bundles of Al2O3 fiber to improve their mechanical and microwave absorption properties. The fracture toughness and flexural strength of Al2O3f /SiCN composite were determined to be 9.4 ± 0.5 MPa•m1/2 and 279 ± 28 MPa, respectively. Based on the design principles for impedance matching, the Al2O3f /SiCN composites before and after oxidation were used as loss and impedance layers, respectively. It was found that the optimized composite had the lowest reflection coefficient (RC) of ‐70 dB and the effective absorption bandwidth (EAB) covering the whole X‐band. In conclusion, Al2O3f /SiCN composite can serve as a high‐temperature structural material with excellent microwave absorption properties for aerospace applications.

Influence of Different Matrices on the Mechanical and Microwave Absorption Properties of SiC Fiber-Reinforced Oxide Matrix Composites

Microwave Absorbability of Unidirectional SiC Fiber Composites As a Function of the Constituents’ Properties

Construction of compound interface in SiC f /mullite ceramic-matrix composites for enhanced mechanical and microwave absorbing performance

Microwave absorption and mechanical properties of SiCf/SiOC composites with SiO2 fillers

Mechanical and microwave absorption properties of Ti-filled SiCf/SiC composites via precursor infiltration and pyrolysis

Effect of different kinds of SiC fibers on microwave absorption and mechanical properties of SiCf/SiC composites

Design and fabrication of Al 2 O 3 f /SiCN composite with excellent microwave absorbing and mechanical properties

Multiscale SiCnw and carbon fiber reinforced SiOC ceramic with enhanced mechanical and microwave absorption properties

The dielectric adjustment in SiCf/mullite composites limited carbon content by in situ growth SiO2 layer

A high-temperature structural and wave-absorbing SiC fiber reinforced Si3N4 matrix composites

Optimal Design And Loss Mechanism Analysis Of Microwave Absorbing Unidirectional Sic Fiber Composites With Broad Absorption Band And Good Polarization Stability

Impedance matching optimization of SiCf/Si3N4–SiOC composites for excellent microwave absorption properties

Preparation and microwave-absorption property of SiO2-SiC-based composites

Effect of SiC nanowires on the high-temperature microwave absorption properties of SiCf/SiC composites

Sandwich structure SiCf/Si3N4–SiOC–Si3N4 composites for high-temperature oxidation resistance and microwave absorption

Dielectric response and microwave absorption properties of SiCw/SiCf composites derived from carbon fiber

Microwave absorption performance of porous heterogeneous SiC/SiO2 microspheres

Matrix compositions and their impact on grain growth and strength of oxide ceramic composites

Electromagnetic wave absorption and mechanical properties of SiC nanowire/low-melting-point glass composites sintered at 580°C in air

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Preparation and investigation of mechanical and electromagnetic wave absorption properties of TiC–TiB2/Si3N4 composites