Abstract:Predictions of various kinds and distributions of bypass flows are important to the thermal hydraulic design of the HTR-PM (High Temperature gas-cooled Reactor-Pebble-bed Module). In the reactor core, gaps among graphite reflectors are widely distributed and connected, which become typical bypass flow paths interacting with the main flow through the pebble bed. In previous researches, simplified flow network was employed to present the main flow through the pebble bed, and a great many interconnected bypass flow paths, while some irregular gaps were modeled by the computational fluid dynamic (CFD) tools to clarify the resistance coefficients. In present paper, a full CFD model was used to further investigate the bypass flow in the HTR-PM reactor core, which could reveal more local helium flow and heat transfer phenomena if vertical gaps close to pebble bed existed. With separately verified CFD models, the vertical gap bypass flow problem was simulated by the full three-dimension symmetrical model including the helium cooling channel, the cold helium plenum, the cavity above the pebble bed, the bottom reflector, the hot helium plenum and the vertical gap from top to bottom reflectors. Flow distributions in the whole height of active core, as well as radial flow directions along the interface of pebble bed and gap, were focused to find out that the bypass flow rate varied in the vertical gap. For horizontal helium flows, the cold helium mainly flowed into the cavity above the pebble bed while hot helium flowed out of pebble bed. In the full power operation condition, the bypass flow rate ratio was between 0.33% and 1.94% of the total helium flow rate when the gap was consistent with 1.6 mm in width. More gap sizes could be modeled in the future to study the effect to the bypass flow rate ratio.

Bypass flow in small absorber sphere channels of the high-temperature gas-cooled reactor pebble-bed module:

Research of Bypass Flows in Vertical Gaps Between Side Reflectors in High Temperature Gas-cooled Reactor

Bypass Flows In Control Rod Channels Of The Htr-Pm

Research on Influence of Different Simulation Methods of Bypass Flow in Thermal Hydraulic Analysis on Temperature Distribution in HTR-10

Analysis Of Bypass Effect On A 250 Mw High Temperature Gas-Cooled Reactor

Various Bypass Flow Paths and Bypass Flow Ratios in HTR-PM

ICONE19-43900 PREDICTION OF BYPASS FLOWS IN HTR-PM BY THE FLOW NETWORK METHOD

CFD Investigation of Bypass Flow in HTR-PM

Numerical Analysis of Bypass Flow in Ceramic Pebble Beds

Researches Of Bypass Flows From Cold Plenum To Hot Plenum In Htr-Pm By The Flow Network Method

Study on Gas Bypass in a Gas-Solid Airlift Loop Reactor

Bypass Flow Computations on the Lofa Transient in A Vhtr

Flow Characteristics Analysis of Purge Gas in Unitary Pebble Beds by CFD Simulation Coupled with DEM Geometry Model for Fusion Blanket

Air Ingress Analysis of Chimney Effect in the 200 MWe Pebble-Bed Modular High Temperature Gas-Cooled Reactor

Performance of Thermal Mixing Structure of HTR-PM Regarding Bypass Flow and Power Effect

Computational flow and heat transfer design and analysis for 1/12 gas-cooled space nuclear reactor

Investigation of Flow and Heat Transfer in the Pebble Bed of the High Temperature Gas-cooled Reactor

Numerical Study of Pebble Recirculation in a Two-Dimensional Pebble Bed of Stationary Atmosphere Using LB-IB-DEM Coupled Method

Experimental and Numerical Study on Helium Flow Characteristics in Randomly Packed Pebble Bed

A review of pebble flow study for pebble bed high temperature gas-cooled reactor

Computational Fluid Dynamics Investigation of Thermal-Hydraulic Characteristics in a Simplified Pebbled Bed Modular Reactor Core Using Different Arrangements of Fuel Elements