Abstract:This work presents a highly reliable and tamper-resistant design of Physical Unclonable Function (PUF) exploiting Resistive Random Access Memory (RRAM). The RRAM PUF properties such as uniqueness and reliability are experimentally measured on 1 kb HfO 2 based RRAM arrays. Firstly, our experimental results show that selection of the split reference and offset of the split sense amplifier (S/A) significantly affect the uniqueness. More dummy cells are able to generate a more accurate split reference, and relaxing transistor's sizes of the split S/A can reduce the offset, thus achieving better uniqueness. The average inter-Hamming distance (HD) of 40 RRAM PUF instances is ~42%. Secondly, we propose using the sum of the read-out currents of multiple RRAM cells for generating one response bit, which statistically minimizes the risk of early retention failure of a single cell. The measurement results show that with 8 cells per bit, 0% intra-HD can maintain more than 50 hours at 150 °C or equivalently 10 years at 69 °C by 1/kT extrapolation. Finally, we propose a layout obfuscation scheme where all the S/A are randomly embedded into the RRAM array to improve the RRAM PUF's resistance against invasive tampering. The RRAM cells are uniformly placed between M4 and M5 across the array. If the adversary attempts to invasively probe the output of the S/A, he has to remove the top-level interconnect and destroy the RRAM cells between the interconnect layers. Therefore, the RRAM PUF has the “self-destructive” feature. The hardware overhead of the proposed design strategies is benchmarked in 64 × 128 RRAM PUF array at 65 nm, while these proposed optimization strategies increase latency, energy and area over a naive implementation, they significantly improve the performance and security.

Evaluation and Optimization of Physical Unclonable Function (PUF) Based on the Variability of FinFET SRAM

Design and optimization of strong Physical Unclonable Function (PUF) based on RRAM array

25.2 A Reconfigurable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source with <6×10−6 Native Bit Error Rate

Optimization of Rram-Based Physical Unclonable Function with A Novel Differential Read-Out Method

A Novel PUF Based on Cell Error Rate Distribution of STT-RAM

Experimental Characterization of Physical Unclonable Function Based on 1 kb Resistive Random Access Memory Arrays

A Highly Reliable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source

A Novel FeFET Array-Based PUF: Co-optimization of Entropy Source and CRP Generation for Enhanced Robustness in IoT Security

Exploiting resistive cross-point array for compact design of physical unclonable function

Exploiting FeFET Switching Stochasticity for Low-Power Reconfigurable Physical Unclonable Function.

DRAM-Based PUF Utilizing the Variation of Adjacent Cells

A Highly Reliable and Tamper-Resistant RRAM PUF: Design and Experimental Validation.

Reliability improvement of SRAM PUFs based on a detailed experimental study into the stochastic effects of aging

An Ultracompact Switching-Voltage-Based Fully Reconfigurable RRAM PUF with Low Native Instability

A novel PUF against machine learning attack: Implementation on a 16 Mb RRAM chip

Long-term continuous assessment of SRAM PUF and source of random numbers

A Time-delay based RRAM PUF Circuit

Estimation during Design Phases of Suitable SRAM Cells for PUF Applications Using Separatrix and Mismatch Metrics

A Novel PUF Using Stochastic Short-Term Memory Time of Oxide-Based RRAM for Embedded Applications

Hardware Implementation of Physical Unclonable Function on FPGAs

Heavy ion-induced microdose effects on the reliability of planar and FinFET-based SRAM physical unclonable functions