Abstract:Zn2Al/-layered double hydroxide (LDH) with intercalated MoO4(2-) was investigated as a potential source of soluble molybdate inhibitor in anticorrosion coatings for hot dip galvanized steel (HDG). The effect of solution pH, soluble chlorides, and carbonates on the release kinetics of the interleaved MoO4(2-) ions from the LDH powder immersed in solutions containing different anions was studied by X-ray diffraction, in situ attenuated total reflectance infrared (ATR-IR) spectroscopy, and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The effect of the solution composition on the total release and the release kinetics was demonstrated. Less than 30% of the total amount of the intercalated MoO4(2-) was released after 24 h of the immersion in neutral 0.005-0.5 M NaCl and 0.1 M NaNO3 solutions whereas the complete release of MoO4(2-) was observed after 1 h in 0.1 M NaHCO3 or Na2SO4 and in alkaline solutions. The in situ ATR-IR experiments and quantification of the released soluble species by ICP-AES demonstrated the release by an anion exchange in neutral solutions and by the dissolution of Zn2Al/-LDH in alkaline solutions. The anion exchange kinetics with monovalent anions was described by the reaction order n = 0.35 ± 0.05 suggesting the diffusion control; for divalent anions, n = 0.70 ± 0.06 suggested the control by a surface reaction. Dissolution of Zn from coated HDG with and without Zn2Al/-MoO4(2-) fillers, leaching of MoO4(2-) from the coating, and the electrochemical impedance spectroscopy response of the coated systems were measured during the immersion in 0.5 M NaCl solutions with and without 0.1 M NaHCO3. Without carbonates, the release of soluble MoO4(2-) was delayed for 24 h with no inhibiting effect whereas with 0.1 M NaHCO3 the immediate release was accompanied by the immediate and strong inhibiting effect on Zn dissolution. The concept of controlling the inhibition performance of LDH hybrid coatings by means of the environment composition is discussed.

Inhibitive Effect of Sodium Molybdate on the Corrosion Behavior of Galvanized Steel in Simulated Concrete Pore Solution

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Effectiveness of an amine-based inhibitor—guanidine for steel in chloride-contaminated concrete

SYNERGISTIC EFFECT OF CORROSION INHIBITION ON BRONZE BY BENZOTRIAZOLE AND SODIUM MOLYBDATE

Study on Synergistic Corrosion Inhibition Effect between Calcium Lignosulfonate (CLS) and Inorganic Inhibitors on Q235 Carbon Steel in Alkaline Environment with Cl−

Synergistic inhibition of benzotriazole and sodium D-gluconate on steel corrosion in simulated concrete pore solution

Sodium Succinate as a Corrosion Inhibitor for Carbon Steel Rebars in Simulated Concrete Pore Solution

Factors Affecting MoO4(2-) Inhibitor Release from Zn2Al Based Layered Double Hydroxide and Their Implication in Protecting Hot Dip Galvanized Steel by Means of Organic Coatings

Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Properties of sodium molybdate-based compound corrosion inhibitor for hot-dip galvanized steel in marine environment

INHIBITIVE EFFECTS OF MOLYBDENATE ON IRON ARTIFACTS DURING DESALINATION PROCESS

Inhibition effect and mechanism of polyacrylamide for steel corrosion in simulated concrete pore solution

Corrosion Protection of Steel by NO3− and NO2− Intercalated Mg-Al Layered Double Hydroxides in Simulated Pore Solutions of Alkali-Activated Slag

Effect of Dioctyl Sebacate on Corrosion Behavior of Fine-grain High-strength Reinforcement in Simulated Concrete Pore Solutions

Efficacies of sodium nitrite and sodium citrate–zinc acetate mixture to inhibit steel rebar corrosion in simulated concrete interstitial solution contaminated with NaCl

Corrosion behavior and mechanism of Cr10Mo1 steel subjected to different corrosive ions in simulated concrete pore solution

Corrosion Resistance Performance of Molybdenum-Containing Weathering Steel

Effects of a Small Addition of Mn on the Corrosion Behaviour of Zn in a Mixed Solution

Anti-Corrosion Performance of Magnesium Potassium Phosphate Cement Coating on Steel Reinforcement: The Effect of Boric Acid