Low-Threshold and Sub-kHz-Linewidth Brillouin Laser Based on Chalcogenide Fiber at 2 $\mu$m
Yingying Wang,Lingling Yang,Fan Yang,Lulu Xu,Zhongchao Wu,Teng Liu,Duanduan Wu,Lei Zhang,Shixun Dai
DOI: https://doi.org/10.1109/jlt.2022.3200700
IF: 4.7
2022-11-15
Journal of Lightwave Technology
Abstract:We experimentally demonstrate a Brillouin fiber laser (BFL) with a low threshold and narrow linewidth at 2 $mu$m employing a chalcogenide As$_{2}$S$_{3}$ fiber as the Brillouin gain fiber. The As$_{2}$S$_{3}$ fiber exhibits a Brillouin gain coefficient of 1.76$ imes 10^{-9}$ m/W at 2 $mu$m, which is two orders of magnitude higher than that of the silica fiber, together with a Brillouin frequency shift of 6.308 GHz and a gain linewidth of 10.2 MHz. By theoretically optimizing the fiber length adopted in the Brillouin ring cavity, a 3-m-long segment of the As$_{2}$S$_{3}$ fiber is used to realize a BFL with excellent performance in terms of laser power threshold and linewidth. The BFL shows a total cavity loss of 6.18 dB, corresponding to a cavity feedback parameter of 24.1$\%$. The lowest laser power threshold of 39 mW and narrowest laser linewidth of $sim$619 Hz so far, to the best of our knowledge, are simultaneously achieved for the BFL at 2 $mu$m. These results benefit from not only the extremely high Brillouin gain coefficient and small effective mode field area of the As$_{2}$S$_{3}$ fiber but also a suitable Brillouin gain fiber length and low cavity loss of the BFL. The relative intensity noise and temporal stability of the BFL are also investigated. Such a low-threshold and sub-kHz-linewidth laser will facilitate the development of practical applications such as gas sensing and coherent LIDAR in the 2 $mu$m spectral range.
engineering, electrical & electronic,optics,telecommunications