Abstract:In most practical electromagnetic interference (EMI) problems, the intricate nature of both EMI source and victim structure often renders direct modeling unfeasible. To address this challenge, this article introduces an innovative EMI estimation method based on hybrid equivalent models. This approach involves the extraction of equivalent dipoles model for EMI source and equivalent circuit model for victim device. To establish the equivalent dipole model for the EMI source, near-field scanning is employed to obtain the phaseless near-field. Subsequently, the dynamic differential evolution method is utilized to derive the equivalent dipole model based on the acquired near-field amplitudes. For the victim's device, a specialized fixture is designed and the de-embedding method is applied to obtain the equivalent S -parameter model. Incorporating the two equivalent models into a hybrid field-circuit simulation enables an effective estimation of EMI coupling between the EMI source and victim. The efficacy of the proposed method is substantiated through rigorous validation exercises involving numerical simulations and physical measurements, including various EMI sources and victim devices.

Simulation Analysis of Electromagnetic Coupling Law of One Typical Electronic Circuit Box Body

Characterization Of Near-Field Coupling Effects From Complicated Three-Dimensional Structures In Rectangular Cavities Using Fast Integral Equation Method

Finite Element Simulation of Electromagnetic Properties of Ferrite Material

Research of Coupling Coefficient Extraction of a Cavity Resonator

Fast characterization of hybrid near-field coupling effects of multi-PCBs in rectangular cavities with FFT-accelerated integral-equation method

Hybrid FDTD Method for Studying Electromagnetic Coupling Effects of Transmission Line Networks

Time-Domain Investigation on Cable-Induced Transient Coupling Into Metallic Enclosures

Characterization of Electromagnetic Wave Coupling With a Noncoaxial Cable with Apertures on its Shield

Modelling Of Wireless Electromagnetic Environment Effects In Multi-Interconnected Metallic Cabins Using The Leapfrog Adi-Fdtd Method

Transient Responses Of Coaxial Cables In An Electrically Large Cabin With Slots And Windowns Illuminated By An Electromagnetic Pulse

Electromagnetic-Circuital-Thermal Multiphysics Simulation Method: A Review

Shielding Characterization Of Metallic Enclosures With Multiple Slots And A Thin-Wire Antenna Loaded: Multiple Oblique Emp Incidences With Arbitrary Polarizations

Transient Electromagnetic Response Of A Coaxial Feeding Monopole Antenna Mounted On A Rectangular Metallic Enclosure Illuminated By Electromagnetic Pulses (Emp)

Electromagnetic Coupling Estimation Based on Hybrid Equivalent Dipoles and Field-Circuit Models

An Efficient Hybrid Technique for Analysis of the Electromagnetic Field Distribution Inside A Closed Environment

A Novel Integrated Approach for Simulation of Electromagnetic Susceptibility Problem

Simulation and Experimental Comparison of Different Coupling Mechanisms for the Wireless Electricity Transfer

A Systematic Coupled Approach For Electromagnetic Susceptibility Analysis Of A Shielded Device With Multilayer Circuitry

Analysis on the Effectiveness of the 20-H Rule Using Numerical Simulation Technique

Noise Coupling Prediction Inside a Small Shielding Box Based on Phaseless Near-Field Scanning

An efficient hybrid simulation technique for modeling the electromagnetic field propagation in a closed environment