Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Optimization of Thermal Management System for Li-ion Batteries Using Phase Change Material

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Numerical Optimization for a Phase Change Material Based Lithium-Ion Battery Thermal Management System

Investigation on the optimization strategy of phase change material thermal management system for lithium-ion battery

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Rate capability and Ragone plots for designing battery thermal management system based on phase change material

Compact Liquid Cooling Strategy with Phase Change Materials for Li-ion Batteries Optimized Using Response Surface Methodology

Phase change material selection using simulation-oriented optimization to improve the thermal performance of lithium-ion battery

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Thermal performance and structural optimization of a hybrid thermal management system based on MHPA/PCM/liquid cooling for lithium-ion battery

Optimization strategy for battery thermal management system with phase change materials, aerogel and cold plates

Design and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

INVESTIGATION AND OPTIMIZATION OF A THERMAL MANAGEMENT SYSTEM FOR LITHIUM-ION BATTERIES COMBINING CLOSED AIR-COOLING WITH PHASE CHANGE MATERIAL

Optimization of the Heat Dissipation Performance of a Lithium-Ion Battery Thermal Management System with CPCM/Liquid Cooling

Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method

Design and optimization of a hybrid cooling configuration combining PCM and liquid cooling for Li-ion battery using data-based response surface approximation model

Phase change materials for lithium-ion battery thermal management systems: A review

Performance of a Combined Battery Thermal Management System with Dual-Layer Phase Change Materials and Air Cooling Technologies

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials