Transient characteristics and sites of pre‐breakdown in spark conditioning for high‐voltage vacuum interrupter under power frequency voltage
Hui Ma,Yu Du,Jingyu Shen,Yuanzhao Li,Yulong Gao,Zhiyuan Liu,Jianhua Wang,Yingsan Geng
DOI: https://doi.org/10.1049/gtd2.13051
2023-11-15
IET Generation Transmission & Distribution
Abstract:Based on a multi‐angle optical path system, the transient characteristics and sites of the pre‐BD in the spark conditioning under the PFV in vacuum are determined experimentally. The results reveal the sequential relationship of the pre‐BD sites and are quite significant to understand the physical mechanism in the spark conditioning. The objective of this paper is to determine the transient characteristics and sites of the pre‐breakdown (pre‐BD) in the spark conditioning under power frequency voltage (PFV) in vacuum. A multi‐angle optical path system was designed and made the determination of the pre‐BD sites in spark conditioning possible, through one camera at two viewing angles. The experimental results indicate that, in the spark conditioning under PFV, the pre‐BDs continuously occurred at a random moment. Within several half‐waves, the number of the pre‐BDs could reach dozens of times, which was the key for the treatment of the electrode surface in conditioning. Under the application of PFV, the single pre‐BD occurred at a random moment, in which it would last for several microseconds and the peak value of the current would reach several amperes. Moreover, the pre‐BD sites randomly distributed in the surface of the electrode and almost covered the whole surface of the electrode. The pre‐BDs took place independently in both time and space, in which there should be no effect between each other of two sequential pre‐BDs. To sum up, the transient characteristics and the sites of the pre‐BDs determined in this paper could reveal the physical mechanism of the pre‐BD on the treatment of electrode surface in the conditioning process, which is quite significant to improve the BD voltage of vacuum interrupter.
engineering, electrical & electronic