Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

Investigating load-dependent conduction through platinum nanocontacts using in situ electromechanical testing inside a transmission electron microscope

Quantitative Measurement of Contact Area and Electron Transport Across Platinum Nanocontacts for Scanning Probe Microscopy and Electrical Nanodevices

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Acts-p 00075 effect of contact resistances on thermal and electrical characterization of metallic nanowires

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Experimental Study on Nanosized Contact Point

Resistive-nanoindentation on gold: Experiments and modeling of the electrical contact resistance

Scanning probe microscopy imaging of metallic nanocontacts

Shear Forces and Heat Conductance in Nanoscale Junctions

Probing electrical transport in nanomaterials: conductivity of individual carbon nanotubes

A finite element based electrical resistance study for rough surfaces: Applied to a bi-layered Au/MWCNT composite for micro-switching applications

Contactless Characterization of Electronic Properties of Nanomaterials Using Dielectric Force Microscopy

Electrical Transport Measurements of the Side-Contacts and Embedded-End-contacts of Platinum Leads on the Same Single-Walled Carbon Nanotube

In situ electron microscopy studies of electromechanical behavior in metals at the nanoscale using a novel microdevice-based system

A New Method for Fabrication and Electrical Characterization of Nanosized Molten Metals.

The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector.

Effect of Electrical Contact Resistance on Measurement of Thermal Conductivity and Wiedemann-Franz Law for Individual Metallic Nanowires.

Contacting Nanowires and Nanotubes with Atomic Precision for Electronic Transport

Establishing Ohmic Contact of a Radial Compressed CNT Bundle with High Work Function Metal

Magnetic phenomena, spin-orbit effects, and Landauer conductance in Pt nanowire contacts