Abstract:Metal foils are extensively used for manufacturing microparts with a high depth-to-thickness ratio by microforming processes. Since there are few grains participating in the deformation of metal foil, the mechanical response of each individual grain intensively affects the deformation behavior and the quality of the formed micropart, which leads to strong anisotropy in microforming. To clarify the size effect on material anisotropy and the impact of scale-dependent plastic anisotropy on the formability of metal foil, a series of tensile experiments and geometrically scaled-down deep-drawing tests of SUS304 foil with different thicknesses of 50-200 mu m and grain sizes of 10.2-80.5 mu m were performed. The experimental results indicate that the anisotropy of flow stress, yield tensile ratio (i.e., ratio of the yield strength to the tensile strength) and elongation at angles of 0 degrees, 45 degrees and 90 degrees to the rolling direction is prominently enhanced with decreasing thickness and that the anisotropy generally shows a substantial sensitivity to grain size. In addition, the abnormally increased hardening rate of flow behavior for metal foil with few grains in thickness direction arises from the deformation-induced transformation from austenite to martensite. The Lankford values in different orientations, the planar anisotropy and normal anisotropy coefficients decrease with increasing grain size and decreasing foil thickness. The foil manifests strong plastic anisotropy when the grain size is comparable to the foil thickness due to the dominant response of individual grains in terms of crystal orientation, texture, size and shape at a low value of t/d ratio (i.e., the ratio of the thickness to the grain size). Furthermore, several macroscale yield criteria are adopted to characterize the anisotropic phenomenon in the multi-scaled deep drawing process. The results suggest that the Yld2000-2d criterion is more suitable than Hill'48 and Von Mises functions to predict the anisotropic behavior of metal foil with a large number of grains involved in microforming. However, the prediction precision is worsened with decreasing t/d ratio, and the use of Yld2000-2d becomes problematic when the foil thickness is of the same magnitude as grain size, which is closely linked to the interactive effects of grain size, foil thickness and crystallographic texture in microscale plastic deformation.

Size Effect on the Forming Limit of Sheet Metal in Micro-Scaled Plastic Deformation Considering Free Surface Roughening

Size effect affected formability of sheet metals in micro/meso scale plastic deformation: Experiment and modeling

Geometry and Grain Size Effects on the Forming Limit of Sheet Metals in Micro-Scaled Plastic Deformation

Characterization of the Microscale Forming Limit for Metal Foils Considering Free Surface Roughening and Failure Mechanism Transformation

Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria

Co-effect of Microstructure and Surface Constraints on Plastic Deformation in Micro- and Mesoscaled Forming Process

Size Effect on Deformation Behavior and Ductile Fracture in Microforming of Pure Copper Sheets Considering Free Surface Roughening

An extended mesoscaled M-K model for predicting discrete ultimate strains and evaluating the effect of normal stress on forming limits

Size effects in thin sheet metal forming and its elastic–plastic constitutive model

Modeling and Analysis of Size Effects on Pure Copper Mechanical Behaviors in Micro Scale Plastic Deformation Processes

Material behavior modelling in micro/meso-scale forming process with considering size/scale effects

Analysis of the Micro/Meso Scale Sheet Forming by Strain Gradient Plasticity and Its Characterization of Tool Feature Size Effects

A Constitutive Model for Metal Plastic Deformation at Micro/meso Scale with Consideration of Grain Orientation and Its Evolution

Crystal Plasticity-Based Analysis and Modelling of Grain Size and Strain Path Dependent Micro-Scaled Deformation Mechanisms of Ultra-Thin Sheet Metals

Modeling of Flow Stress Size Effect Based on Variation of Dislocation Substructure in Micro-Tension of Pure Nickel

Size dependence of flow stress and plastic behaviour in microforming of polycrystalline metallic materials

Experimental and Numerical Studies of Coupling Size Effects on Material Behaviors of Polycrystalline Metallic Foils in Microscale Plastic Deformation

A new ductile failure criterion for micro/meso scale forming limit prediction of metal foils considering size effect and free surface roughening

Study of Microstructural Grain and Geometric Size Effects on Plastic Heterogeneities at Grain-Level by Using Crystal Plasticity Modeling with High-Fidelity Representative Microstructures

Size Effect on Plastic Anisotropy in Microscale Deformation of Metal Foil

Feasibility evaluation of failure models for predicting forming limit of metal foils