Abstract:In the present study, we report the systematic investigation of the effect of chemical oxidation on the structure of single-walled carbon nanotubes (SWNTs) by using different oxidants. The oxidation procedure was characterized by using infrared spectroscopy and transmission electron microscopy (TEM). The SWNTs were produced by chemical vapor deposition (CVD) and oxidized with three kinds of oxidants: (1) nitric acid (2.6 M), (2) a mixture of concentrated sulfuric acid (98 wt %) and concentrated nitric acid (16 M) (v/v = 3/1) and (3) KMnO4. The results reveal that the different functional groups can be introduced when the SWNTs are treated with different oxidants. Refluxing in dilute nitric acid can be considered as a mild oxidation for SWNTs, introducing the carboxylic acid groups only at those initial defects that already exist. The abundance of the carboxylic acid groups generated with this oxidant remained constant along with the treating time. In contrast, sonication of SWNTs in H2SO4/HNO3 increased the incidence of carboxylic acid groups not only at initial defect sites but also at newly created defect sites along the walls of SWNTs. Compared to the two oxidants above, when KMnO4 in alkali was used as the oxidant, which is relatively mild, different amounts of −OH, −CO, and −COOH groups were introduced. The oxidation processes begin mainly with the oxidation of the initial defects that arise during the CVD growth of the SWNTs and are accompanied by processes that can be roughly divided into two steps: (1) the defect-generating step and (2) the defect-consuming step. Specifically, during the defect-generating step, the oxidants attack the graphene structure by electrophilic reactions and generate active sites such as −OH and −CO. This step depends on the oxidant's ability to generate −C−OH groups and to transform them into −CO groups. During the defect-consuming step, the graphene structure of the tube was destroyed by the oxidation of the generated active sites in step 1. The defect-consuming step mostly counts on the ability of the oxidant to etch/destroy the graphite-like structure around the already generated −CO and their neighborhood groups.

Investigation of Etching Behavior of Single-Walled Carbon Nanotubes Using Different Etchants

Real-Time Observation of Carbon Nanotube Etching Process Using Polarized Optical Microscope.

Theoretical Study on Electronic Structures and Spectroscopic Regularities of Ethylated Single-Walled Carbon Nanotubes

Synergy Between Structure Characteristics and the Solution Chemistry in a Near/Non-Equilibrium Oxidative Etching of Penta-Twinned Palladium Nanorods

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Selective Electrochemical Etching of Single‐Walled Carbon Nanotubes

Hydrogenation and Hydro-Carbonation and Etching of Single-Walled Carbon Nanotubes

Selective growth of semiconducting single-walled carbon nanotubes solely from carbon monoxide

Hydrogenation and Hydrocarbonation and Etching of Single-Walled Carbon Nanotubes.

A Facile, Low‐Cost, and Scalable Method of Selective Etching of Semiconducting Single‐Walled Carbon Nanotubes by a Gas Reaction

Single-Walled Carbon Nanotube Thin Film with High Semiconducting Purity by Aerosol Etching toward Thin-Film Transistors

Modeling of thermocapillary flow to purify single-walled carbon nanotubes

Growth Kinetics of Single-Walled Carbon Nanotubes with a (2n, N) Chirality Selection

Growth kinetics of single-walled carbon nanotubes with a (2 n, n) chirality selection

Oxygen-containing functional groups on single-wall carbon nanotubes: NEXAFS and vibrational spectroscopic studies

Sorting out Semiconducting Single-Walled Carbon Nanotube Arrays by Preferential Destruction of Metallic Tubes Using Water

In Situ Study of Wet Chemical Etching of ZnO Nanowires with Different Diameters and Polar Surfaces by LCTEM

Optical Characterizations and Electronic Devices of Nearly Pure (10,5) Single-Walled Carbon Nanotubes

A Study on the O2 Plasma Etching Method of Spray-Formed SWCNT Films and Their Utilization as Electrodes for Electrochemical Sensors

Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes

Selective Etching of Metallic Carbon Nanotubes by Gas-Phase Reaction