Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-parameter Optimization of Shell-and-tube Heat Exchanger with Helical Baffles Based on Entransy Theory

Configuration optimization of shell-and-tube heat exchangers with helical baffles using multi-objective genetic algorithm based on fluid-structure interaction

Numerical Investigation on the Multi-Objective Optimization of a Shell-and-tube Heat Exchanger with Helical Baffles

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Energy and Cost Optimization of Shell and Tube Heat Exchanger with Helical Baffles Using Kriging Metamodel Based on MOGA

Application of Response Surface Method and Multi-Objective Genetic Algorithm to Configuration Optimization of Shell-and-tube Heat Exchanger with Fold Helical Baffles

Structural Optimization of Shell-Tube Heat Exchanger with Helical Baffles Based on Fluid-Structure Interaction

Numerical Investigation and Optimization on Shell Side Performance of A Shell and Tube Heat Exchanger with Inclined Trefoil-Hole Baffles

Performance investigation and multi-objective optimization of helical baffle heat exchangers based on thermodynamic and economic analyses

Configuration Optimization of a Shell-and-Tube Heat Exchanger with Segmental Baffles Based on Combination of NSGAII and MOPSO Embedded Grouping Cooperative Coevolution Strategy

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Multi-objective optimization of helically coiled tube heat exchanger based on entropy generation theory

Multi-objective optimization on shell-side performance of rod-baffle heat exchangers with twisted oval tubes

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Design optimization of a shell and tube heat exchanger with staggered baffles using neural network and genetic algorithm

Multi-objective Shape Optimization of a Heat Exchanger Tube Fitted with Compound Inserts

Thermal-economic optimization design of shell and tube heat exchanger using an improved sparrow search algorithm

Investigation of heat transfer Exergy loss number and its application in optimization for the shell and helically coiled tube heat exchanger

Thermal optimization of shell and tube heat exchanger using porous baffles

Application of Entransy-Dissipation-based Thermal Resistance for Performance Optimization of Spiral-Wound Heat Exchanger

A Design and Rating Method for Shell-and-Tube Heat Exchangers with Helical Baffles