Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Martensitic transformation and mechanical properties of Ti-Ni-Hf high temperature shape memory alloy with network structure second particles

Characterization of high-strength Ti–Ni shape memory alloys prepared by hot pressed sintering

Microstructure and martensitic transformation of Ti49Ni51−Hf high temperature shape memory alloys

Microstructure and martensitic transformation of Ti49Ni51−xHfx high temperature shape memory alloys

Effect of Aging on the Phase Transformation and Mechanical Behavior of Ti36ni49hf15 High Temperature Shape Memory Alloy

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Microstructure and Martensitic Transformation of NiTiHfSc High Temperature Shape Memory Alloys

High-temperature martensitic transformation of CuNiHfTiZr high- entropy alloys

Influence of chemical composition on the amount of second phases precipitates and transformation temperatures of TiNiPdCu shape memory alloys prepared through novel powder metallurgy route

Phase Transformation and Precipitation in Aged Ti–Ni–Hf High-Temperature Shape Memory Alloys

Precipitation and Coarsening Kinetics of H-phase in NiTiHf High Temperature Shape Memory Alloy

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

Microstructure and Thermoelastic Martensitic Transformation in Ni-Low and -Rich Ni–Ti–Hf–Nb Hightemperature Shape Memory Alloys

Effect of Ti/Ni and Hf/Zr ratio on the martensitic transformation behavior and shape memory effect of TiNiHfZr alloys

Martensitic transformations and kinetics in Ti-Ni-Cu-Hf shape memory alloy

Effects of Heat Treatment on the Transformation Temperature and the Microstructure of Ni-Ti-Nb Shape Memory Alloy

The Role of H-phase in Thermal Hysteresis and Shape Memory Properties in Ni50Ti30Hf20alloy

Tailoring martensitic transformation and mechanical properties of Ti–Ni composite reinforced by network structure of in-situ TiB and La2O3 phase

Microstructure of Stress-Induced Martensite in a Ti–Ni–Hf High Temperature Shape Memory Alloy

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy