Abstract:The strength anisotropy and strain softening of natural soil can significantly impact the bearing capacity of shallow foundations on clay. In this article, we present a nonlocal numerical method to study the coupled rotation of the maximum normal stress axis and strain softening on the bearing capacity of shallow foundations on clay through a Cosserat strain softening constitutive model. The strength anisotropy and strain softening characteristics were numerically implemented into a finite-element (FE) program by dynamically updating the anisotropic cohesion in global Newton–Raphson iterations. Due to its nonlocal feature, the proposed nonlocal numerical method can overcome the mesh dependence in simulating the progressive failure of clay through the classical FE method. We first validated the efficacy of this method against the results of the plane strain test and numerical results in the literature. We then study the bearing capacity of a strip footing over anisotropic and strain-softening clay through the implemented numerical method. The results indicated that the deposition angle has an important effect on the bearing capacity and failure mode. The effects of the degree of anisotropy and strain softening on the ultimate bearing capacity are quantified through the numerical method. It is found that (1) the proposed method can effectively reflect the characteristics of the maximum normal stress axis rotation on the failure surface of the footing; (2) the ultimate bearing capacity of a footing (Pu) on anisotropic clay could increase linearly with an increase in the anisotropy ratio k (i.e., k is the ratio between C1 and C2) and decreases with an increase in the softening modulus; and (3) the strength anisotropy and strain softening are strongly coupling factors impacting the bearing capacity of anisotropic clay.

Regularized Finite Element Modeling of Progressive Failure in Soils Within Nonlocal Softening Plasticity

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

An Analytical Solution Of 1-D Finite Strain Consolidation Of Saturated Soft Clay Under Multistep Linear Loading

Large Strain Consolidation Stochastic Finite Element Method for Soft-clay Road Embankment Analysis

An implicit stress update algorithm for the plastic nonlocal damage model of concrete

Stability analysis of slope in strain-softening soils using local arc-length solution scheme

Geotechnical analysis involving strain localization of overconsolidated soils based on unified hardening model with hardening variable updated by a composite scheme

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

Study of Properties of 1-D Complex Nonlinear Consolidation of Saturated Soils

A sequential linear complementarity problem for multisurface plasticity

Study on 1-D Nonlinear Consolidation Behavior for Ningbo Soft Clay with Threshold Gradient

Numerical Simulation of Stone Column Replacement by Consecutive Dynamic Compaction in Soft Ground

FINITE-STRAIN CONSOLIDATION FINITE-ELEMENT METHOD SUBJECT TO NON-CONSERVATIVE BODY FORCE

Effects of Strength Anisotropy and Strain Softening on Soil Bearing Capacity through a Cosserat Nonlocal Finite-Element Method

Development of an SPH-based method to simulate the progressive failure of cohesive soil slope

Finite element analysis of large deformation for progressive failure of soil based on Cosserat continuum theory

Formulation and implementation of an isotropic plasticity model enriched with shift stress and fractional flow rule

A robust stress update algorithm for elastoplastic models without analytical derivation of the consistent tangent operator and loading/unloading estimation

A computational model for dynamic strain localization in unsaturated elasto‐viscoplastic soils

Simulation of localization failure with strain-gradient-enhanced damage mechanics

A Novel Numerical-Iterative-approach for Strain-Softening Surrounding Rock Incorporating Rockbolts Effectiveness and Hydraulic-Mechanical Coupling Based on Three-Dimensional Hoek-Brown Strength Criterion